Abstract:TiO2-doped HfO2 gate dielectric thin films have been deposited on Si(100) substrates by RF sputtering. The component, morphology, structure, optical and interfacial properties of Hf-1 xTixO2 films related to TiO2 concentration are systematically investigated by atomic force microscope (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared (FTIR). By employing Cauchy-Urbach model, the optical constants, such as refractive index (n), extinction coefficient (k), absorption coefficient (alpha), and optical band gap (E-g) have been determined precisely. Measurements from XRD have confirmed that TiO2 incorporating into HfO2 films leads to the increase of the crystallization temperature of HfO2 films with increasing the TiO2 concentration. SE analyses have indicated that reduction in band gap and refractive index has been observed with increasing the TiO2 component in Hf-1 xTixO2 films. The increase in Urbach parameter E-U with the increase of TiO2 concentration also suggests the rise in disorder for Hf-1 xTixO2 films. FTIR measurements for Hf-1 xTixO2/Si gate stack indicate the existence of the interfacial layer regardless of the TiO2 concentration. For the 9% TiO2-doped HfO2 samples, the shift in FTIR characteristic peak suggests the formation of the silicate layer, which leads to the suppressed interfacial layer growth during deposition. As a result, it can be conclude that the TiO2 component in Hf-1 xTixO2 films should be controlled precisely to guarantee interfacial properties of Hf-1 xTixO2/Si gate stacks. (C) 2014 Elsevier B.V. All rights reserved.

Analysis Of Titanium And Vanadium Oxide Thin Film By Method Of Reactive Co-Sputtering

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Model of Reactive Magnetron Sputtering of a Two-Component Composite Target

Modelling and Optimization for Deposition of SiO X N Y Films by Radio-Frequency Reactive Sputtering

Effect of the Substrate Temperature on the Crystallization of TiO2 Films Prepared by DC Reactive Magnetron Sputtering

Preparation and Properties of Titanium Oxide Thin Film by Midfrequency Alternative Reactive Magnetron Sputtering Technique

Titanium monoxide and titanium dioxide thin film formation by magnetron sputtering and its thermodynamic model

Simulation of Ti Target Characteristics in TiO2 Film Growth by Medium Frequency Reactive Magnetron Sputtering

Crystallization Behaviors of TiO2 Films Derived from Thermal Oxidation of Evaporated and Sputtered Titanium Films

Analysis of the Inhomogeneous Growth of Sputtered Black TiO 2 Thin Films

Reactive pulsed DC magnetron sputtering deposition of vanadium oxide thin films: Role of pulse frequency on the film growth and properties

Effect of nanoscale surface oxide layers on the cold spray of commercially pure titanium and Ti–6Al–4V powders

Influence of the method of gas supply to the chamber on the processes of reactive magnetron sputtering of Ti-Al composite target

The Deposition and Properties of Titanium Films Prepared by High Power Pulsed Magnetron Sputtering

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Compositional and Structural Evolution of the Titanium Dioxide Formation by Thermal Oxidation

HVOF Spray Performance Optimization Analysis and Experimental Research of WC–12Co Coating on Ti Alloy

Research on flame characteristics and coating growth process of titanium alloy in HVAF spraying

Calculation of the Component Composition of the Surface Layers of Titanium Carbide Sputtered with Light Ions

Thermo-reactive deposition processed vanadium carbide coating: Growth kinetics model and diffusion mechanism