Abstract:Scanning Laser Doppler Vibrometer (SLDV) measurements are affected by sensor head vibrations as if they are vibrations of the target surface itself. This paper presents practical correction schemes to solve this important problem. The study begins with a theoretical analysis, for arbitrary vibration and any scanning configuration, which shows that the only measurement required is of the vibration velocity at the incident point on the final steering mirror in the direction of the outgoing laser beam and this underpins the two correction options investigated. Correction sensor location is critical; the first scheme uses an accelerometer pair located on the SLDV front panel, either side of the emitted laser beam, while the second uses a single accelerometer located along the optical axis behind the final steering mirror. Initial experiments with a vibrating sensor head and stationary target confirmed the sensitivity to sensor head vibration together with the effectiveness of the correction schemes which reduced overall error by 17 dB (accelerometer pair) and 27 dB (single accelerometer). In extensive further tests with both sensor head and target vibration, conducted across a range of scan angles, the correction schemes reduced error by typically 14 dB (accelerometer pair) and 20 dB (single accelerometer). RMS phase error was also up to 30% lower for the single accelerometer option, confirming it as the preferred option. The theory suggests a geometrical weighting of the correction measurements and this provides a small additional improvement. Since the direction of the outgoing laser beam and its incident point on the final steering mirror both change as the mirrors scan the laser beam, the use of fixed axis correction transducers mounted in fixed locations makes the correction imperfect. The associated errors are estimated and expected to be generally small, and the theoretical basis...

Compensation Of Laser Beam Directional Stability Offset Error By Using Translational Spectroscope

A Compact and High-Precision Method for Active Beam Stabilization System

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Method for enhancing stability in multi-beam microscopy

Laser Collimation Method Based on Differential Compensating Beam Drift

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

High-precision laser alignment technique based on spiral phase plate

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Novel Enhancing Resolution Method for Measurement Straightness Error

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Optimal Control Algorithm for Optical Path Scanning Control System Based on Relative Performance Error

Design and Characterization of Four-Degree-of-Freedom Fast Steering Mirror for Laser Compensation System

Correction of error induced by nonlinear movement of feedback mirror in laser feedback stress measurement system

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Structural stability design of an optical mirror mount adjustment mechanism

Study on Dynamic Error Compensation of Laser Emitter for Digging Navigation System

Structure and Closed-Loop Control of A Novel Compact Deformable Mirror for Wavefront Correction in A High Power Laser System

High-precision Small-angle Measurement of Laser-fiber Autocollimation Using Common-path Polarized-light Difference

Establishing correction solutions for Scanning Laser Doppler Vibrometer measurements affected by sensor head vibration