Abstract:The trigger voltage walk-in effect has been investigated by designing two different laterally diffused metal—oxide—semiconductor (LDMOS) transistors with an embedded silicon controlled rectifier (SCR). By inserting a P+ implant region along the outer and the inner boundary of the N+ region at the drain side of a conventional LDMOS transistor, we fabricate the LDMOS-SCR and the SCR-LDMOS devices with a different triggering order in a 0.5 μm bipolar-CMOS-DMOS process, respectively. First, we perform transmission line pulse (TLP) and DC-voltage degradation tests on the LDMOS-SCR. Results show that the trigger voltage walk-in effect can be attributed to the gate oxide trap generation and charge trapping. Then, we perform TLP tests on the SCR-LDMOS. Results indicate that the trigger voltage walk-in effect is remarkably reduced. In the SCR-LDMOS, the embedded SCR is triggered earlier than the LDMOS, and the ESD current is mainly discharged by the parasitic SCR structure. The electric potential between the drain and the gate decreases significantly after snapback, leading to decreased impact ionization rates and thus reduced trap generation and charge trapping. Finally, the above explanation of the different trigger voltage walk-in behavior in LDMOS-SCR and SCR-LDMOS devices is confirmed by TCAD simulation.

Analysis of LDMOS-SCR ESD protection device for 60V SOI BCD technology

Comparative Study of Reliability Degradation Behaviors of LDMOS and LDMOS-SCR ESD Protection Devices

Study of LDMOS-SCR: A High Voltage ESD Protection Device

LDMOS–SCR: a Replacement for LDMOS with High ESD Self-Protection Ability for HV Application

An Area-Efficient LDMOS-SCR ESD Protection Device for the I/O of Power IC Application

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Study of Turn-on Characteristics of SCRs for ESD Protection with TDR-O and TDR-S TLPs

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

Effect of poly-silicon gate on ESD protection performance of LDMOS-SCR devices

A Modified LDMOS Device with Improved ESD Protection Performance

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

Investigation of the Trigger Voltage Walk-In Effect in Ldmos for High- Voltage Esd Protection

Improved LDMOS for ESD Protection of High Voltage BCD Process

Comparison of different MOS-triggered SCR structures for on-chip ESD protection

Investigation of Boundary-Mos-triggered SCR Structures for On-Chip ESD Protection

Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device

RC-Embedded LDMOS-SCR with High Holding Current for High-Voltage I/O ESD Protection

Investigation of Esd Protection Strategy in High Voltage Bipolar-Cmos-Dmos Process

Robust and area-efficient nLDMOS-SCR with waffle layout structure for high-voltage ESD protection

New Electrostatic Discharge Protection Device for VBO High Speed Chip

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology