Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Study on IMD3 in power combining system

Novel Millimeter-Wave Power Combining Utilizing Wafer Level Packaging Technology

A Design of Wide-Band and High-Isolation Power Divider

A Three-Way Reconfigurable Power Divider/Combiner

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Novel millimeter wave power-combining system in 3-D packaging level

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

Study and fabrication of multimode interference GaAs optical power splitter

A General Analytical Method for Suppressing the Third-Order Intermodulation in Microwave Photonic Link Based on Dual-Parallel Mach–Zehnder Modulator

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

A Novel Power Divider Integrated with Siw and Dgs Technology

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Experimental Demonstration Of Two-Dimensional Multimode-Interference Optical Power Splitter

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

A Novel Millimeter-Wave Power Combining Circuit

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

An Isolated Three-Way Power Combiner via Magnetically Coupled Microstrip Ring Probes

Compact Power Divider with Improved Isolation and Bandpass Response

Component-Splitting and Multi-Segment Compensation Methods for Common-Mode and Differential-Mode EMI Suppression in High-Power SWPDT Systems