Abstract:Controlling of mass transport in the anode catalyst layer has become one of the major challenges in Direct Formic Acid Fuel Cells (DFAFCs) owing to the poor formic acid transport and crossover. This study is aim to introduce the microfiber-pores designed anode catalyst layers by mean to improve the mass transport limitation and eventually improving the performance of DFAFCs. Polystyrene fibers (PSFs) were fabricated with different diameter by electrospinning prior to control their length by ultrasonic homogenization. Different amount of PSF as a pore forming agent were then added to the catalyst ink before catalyst coated membrane (CCM) were made by spraying the catalyst ink on the membrane. The CCM were then soaked in ethyl acetate solution to remove the PSF in order to improve the porous structure of anode catalyst layer. Different diameter and amount of PSFs exhibited different pore properties of the catalyst layer and its effect on the mass transport and the performance of DFAFC were then investigated. From the results, the microfiber-pores designed anode catalyst layers showed better performance remarkably at the higher current density region as compared to the conventional anode catalyst layer. Moreover, it was also found that there were optimum diameter and amount of PSF used for the highest performance of DFAFC. This could be attributed to the existence of the microfiber-pores have provide larger active catalyst region which accelerate the fuel transport and the CO 2 emission in anode catalyst layer. Thus, these results indicate that the introduction of the microfiber-pores on the anode catalyst layer is a promising approach in order to improve the mass transport resistance, leading to enhance the DFAFCs performance.

Effects Of Anode Diffusion On Direct Methanol Fuel Cell (Dmfc) Performance

The function of microporous layers and the interaction between the anode and cathode in DMFCs. Part I: The double roles of microporous layers in DMFCs

A novel multi-porous and hydrophilic anode diffusion layer for DMFC

Research Progress of Anode Catalysts for Direct Methanol Fuel Cell

Anode Sub-Layer in Membrane Electrode Assembly of DMFC

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Recent Progress in Anode Catalysts of Direct Methanol Fuel Cells

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Effect of Methanol Concentration on Performance of Passive DMFC

Progress in Anode Catalysts and Preparation Techniques for Direct Methanol Fuel Cells

(Digital Presentation) Power-Generation and Mass-Transport Characteristics of Direct Formic Acid Fuel Cell Using Pore-Designed Anode Electrode

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Experimental investigations on the effect of current collector open ratio on the performance of a passive direct methanol fuel cell with liquid electrolyte layer

Influence of Current Collector Design and Combination on the Performance of Passive Direct Methanol Fuel Cells

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Investigation of anode flow field for direct dimethyl ether fuel cell

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Anode Catalysts and Cathode Catalysts of Direct Methanol Fuel Cells

Influence of intermediate liquid electrolyte layer on the performance of passive direct methanol fuel cell