Abstract:Water can cause the growth and oxidation of Cu nanoparticles on the surface of Cu-based catalysts, leading to their deactivation. However, during methanol synthesis process from syngas on Cu-based catalysts, water is inevitably produced as a by-product due to the presence of CO2. Therefore, enhancing the stability of Cu-based catalysts during the reaction, particularly in the presence of water, is crucial. In this study, Cu/ZnO/Al2O3 was first subjected to wet etching and then hydrophobically modified using the sol–gel method with methyltrimethoxysilane (MTMS) and the grafting method with 1H,1H,2H,2H-perfluoroalkyltriethoxysilanes (PFOTES) as modifiers. These modifications aimed to mitigate the impact of water on the catalyst and improve its stability. After modification, the catalysts exhibited excellent hydrophobicity and enhanced catalytic activity in the methanol synthesis process. The surface physical properties, composition, and thermal stability of the catalysts before and after hydrophobic modification were characterized by SEM, FT-IR, BET, XRD and TGA. Additionally, molecular dynamics simulations were employed to compare the diffusion behavior of water molecules on the catalyst surfaces before and after hydrophobic modification. The results indicated that the modified catalyst surface formed a micro/nano structure composed of nanosheets and nanosheet clusters, while the hydrophobic modification did not alter the structure of the catalyst. According to the results of simulations, the hydrophobic layers on the modified catalysts were able to expel water quickly from the surfaces and reduce the relative concentration of water molecules at the active sites, thereby improving the stability of the catalyst. Notably, the thermal stability and hydrophobicity of the PFOTES-modified catalyst were superior to those of the MTMS-modified catalyst, resulting in a more significant enhancement in catalyst stability, which aligned with the experimental results.

Influence of microwave irradiation on precursor microstructure and catalytic performance of Cu/ZnO/Al2O3 for slurry methanol synthesis

Microwave-irradiation promoted Cu/ZnO/Al2O3 catalyst for hydrogen production from steam reforming of methanol

A Unique Microwave Effect on the Microstructural Modification of Cu/ZnO/Al2O3 Catalysts for Steam Reforming of Methanol.

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Fine-tuning Pt Nanoparticle and Coordination for Enhanced Catalytic Efficiency in Microwave-Assisted Methylcyclohexane Dehydrogenation over Pt/Al2O3 Catalysts

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Surface Properties of CuO/ZnO/Al_2O_3 Catalyst for Methanol Synthesis in Slurry Reactor

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Influence of the Calcination on the Activity and Stability of the Cu/ZnO/Al2O3 Catalyst in Liquid Phase Methanol Synthesis

Cu/Zno/Al2o3 Catalysts Modified by Octa-Potassium Titanate Whiskers with Ultrasonic Treatment for Methanol Synthesis

Microwave synthesis conditions dependent catalytic performance of hydrothermally aged CuII-SSZ-13 for NH3-SCR of NO

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration

Thermal Stability Improvement of Cu-Based Catalyst by Hydrophobic Modification in Methanol Synthesis

Cuo/Zno/Al2o3 Catalyst Prepared by Mechanical-Force-Driven Solid-State Ion Exchange and Its Excellent Catalytic Activity under Internal Cooling Condition

Enhanced performance and stability of Cu/ZnO catalyst by introducing MgO for low-temperature methanol synthesis using methanol itself as catalytic promoter

Alcohol Solvent Assisted Synthesis of Metallic and Metal Oxide Catalysts: As-Prepared Cu/ZnO/Al 2 O 3 Catalysts for Low-Temperature Methanol Synthesis with an Ultrahigh Yield

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Oxidative Carbonylation of Methanol to Dimethyl Carbonate over Cu(I) Zeolite Catalyst

The Sintering of a Cu-Based Methanol Synthesis Catalyst