Abstract:In this work, Ce and Mn were added to Cu-SSZ-39 zeolites by ion-exchange process, and their activity performance for selective catalytic reduction of NOx with ammonia (NH3-SCR), especially hydrothermal stability (hydrothermal aging at 750, 800, 850 °C) was investigated systematically. It is found that the addition of Ce and Mn, Mn more evidently, both can greatly improve the activity of Cu-SSZ-39 catalyst. Moreover, MnCu-SSZ-39 catalyst have shown superior hydrothermal stability compared with Cu-SSZ-39 catalyst, and outstandingly its activity is not only not decreased significantly like Cu-SSZ-39 but improved obviously after hydrothermal aging at as high as 850°C. The high and improved activity of Ce and Mn added Cu-SSZ-39 is ascribed to more active CuO crystallites formation in the inner channel and higher acidity strength. The superior hydrothermal stability of MnCu-SSZ-39 may be due to its well-preserved structure and acid density even after hydrothermal aging at as high as 850 °C. Moreover, during the hydrothermal aging process, not only Cu oxides aggregation is inhibited, but also more Cu2+ ion species are induced to ion exchange sites in MnCu-SSZ-39, which may account for its excellent hydrothermal stability (even higher than the activity of fresh samples). The mechanism analysis has shown NH3-SCR reaction over Cu-SSZ-39 and CeCu-SSZ-39 samples follow the "Langmuir−Hinshelwood" (L-H) mechanism, while on MnCu-SSZ-39, it follows both "L−H" and "Eley−Rideal" (E−R) mechanisms, which may also be another reason for its excellent activity and hydrothermal stability. Moreover, "Fast SCR" mechanisms also occur and contribute over hydrothermal aged A-MnCu-SSZ-39 sample, in addition to "L-H" and "E-R" mechanisms. Thus, the easily prepared MnCu-SSZ-39 catalyst has shown the excellent activity and super hydrothermal stability, with 90% NO conversion at 245 °C and broader temperature window of 245 °C to 550 °C, even after hydrothermal aging at 850 °C, therefore indicate great potential for future application in NOx purifying from diesel engine exhaust.

Microwave synthesis conditions dependent catalytic performance of hydrothermally aged CuII-SSZ-13 for NH3-SCR of NO

Understanding the influence of hydrothermal treatment on NH3-SCR of NO activity over Cu -SSZ-16

Rapid synthesis and hydrothermal stability enhancement of Cu-SSZ-13 zeolites for nitrogen oxide removal

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

Promoting effect of Ce and Mn addition on Cu-SSZ-39 zeolites for NH3-SCR reaction: Activity, hydrothermal stability, and mechanism study

In-Situ Synthesis of Cu-SSZ-13 Catalyst: Effect of Crystallization Time on NH3-SCR Performance

Revealing the nature of crystal size on high-temperature hydrothermal stability of Cu/SSZ-13 NH3-SCR catalysts

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Regulation of Al distributions and Cu2+ locations in SSZ-13 zeolites for NH3-SCR of NO by different alkali metal cations

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Direct Synthesis of High Silica Ssz-16 Zeolite with Extraordinarily Superior Performance in Nh3-Scr Reaction

Zeolite and Related Porous Materials for Energy in New Era of Carbon Peak and Carbon Neutralization

Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

A comparison of Al-rich Cu-SSZ-13 zeolites synthesized by different methods in their Al distribution, hydrothermal stability and catalytic performance in the selective catalytic reduction of NOx with NH3

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Tuning the high-temperature hydrothermal stability of one-pot derived Cu-SSZ-13 in the presence of SO 2 for selective catalytic reduction of NO x by ammonia

In-situ One-Pot Synthesis of Ti/Cu-SSZ-13 Catalysts with Highly Efficient NH3-SCR Catalytic Performance as Well as Superior H2O/SO2 Tolerability

Synthesis of Cu-SSZ-13 from Zeolite Analcime Derived from Solid Waste and Natural Minerals for Selective Catalytic Reduction of NO

Understanding enhancement of strong Copper-Yttrium interactions on catalytic properties of Cu/Y-SSZ-13 for NH 3 -SCR