Abstract:Mixing performance for a consecutive competing reaction system has been investigated in a swirling vortex flow reactor (SVFR). The direct quadrature method of moments combined with the interaction by exchange with the mean (DQMOM-IEM) method was employed to model such reacting flows. This type of reactors is able to generate a strong swirling flow with a great shear gradient in the radial direction. Firstly, mixing at both macroscale and microscale was assessed by mean mixture fraction and its variance, respectively. It is found that macromixing can be rapidly achieved throughout the whole reactor chamber due to its swirling feature. However, micromixing estimated by Bachelor length scale is sensitive to turbulence. Moreover, the additional introduction of ultrasound irradiation can significantly improve the mixing uniformity, namely, free of any stagnant zone presented in the reactor chamber on a macroscale, and little variance deviating from the mean environment value can be observed on a microscale. Secondly, reaction progress variable and the reactant conversion serve as indicators for the occurrence of side reaction. It is found that strong turbulence and a relatively fast micromixing process compared to chemical reaction can greatly reduce the presence of by-product, which will then provide homogenous environment for particle precipitation. Moreover, due to the generation of cavitation bubbles and their subsequent collapse, ultrasound irradiation can further intensify turbulence, creating rather even environment for chemical reactions. Low conversion rate was observed and little by-products were generated consequently. Therefore, it is suggested that the SVFR especially intensified by ultrasound irradiation has the ability to provide efficient mixing performance for the fine-particle synthesis process.

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

The Effect of Mixing on Co‐precipitation and Evolution of Microstructure of Cu‐ZnO Catalyst

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Effect of Turbulence in Micro‐reactors on Ultrafast Competitive Reactions in Cu‐Zn Co‐precipitation

The Effect of Cu–Zn Distribution in Zincian Malachite on the Formation of Individual CuO and ZnO Particles

Advantage of Microreactor on the Synthesis of High-Activity Cu-Mn Catalyst by Co-Precipitation

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

High-performance Cu/ZnO Catalysts Prepared Using a Three-Channel Microreactor

Influence of Interphase Distribution of Reactants on Preparation of Nano-CuO by Adsorption Phase Technique

Unveiling the Role of Mixing in Oxygen Vacancy Formation and Metal Dispersion During Co-Precipitation Synthesis of Catalysts in Microreactor

Effect of Water Layer in a Microreactor on the Low-Temperature Synthesis of High-Activity Cu/ZnO Catalysts

Influence of the component interaction over Cu/ZrO2 catalysts induced with fractionated precipitation method on the catalytic performance for methanol steam reforming

A Unique Microwave Effect on the Microstructural Modification of Cu/ZnO/Al2O3 Catalysts for Steam Reforming of Methanol.

Preparation of Hollow Cu and CuO x Microspheres with a Hierarchical Structure for Heterogeneous Catalysis

The dispersed states of copper species on CuO/ZrO2 catalysts and its influence on the catalytic performance

Size Effect of Cu Particles on Interface Formation in Cu/ZnO Catalysts for Methanol Synthesis

Influence of the mixing ways of reactants on ZnO morphology

Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation

Reactive mixing performance for a nanoparticle precipitation in a swirling vortex flow reactor

The effect of CuO crystallite size on the structure and performance of CuZnAl catalyst for mixed alcohols synthesis from syngas