Abstract:By altering component formulation and modifying a conventional coprecipitation procedure, we have synthesized a high-Zn-, low-Cu-level Cu/ZnO/Al2O3 catalyst which showed a 54.4 mmol/(mL catalyst h) of methanol yield and 66% CO conversion measured at 230 degrees C, 8 MPa, and 10000 h(-1). Comparative surface studies of this catalyst and the catalyst prepared according to the commercial standard (low-Zn-, high-Cu-level) were pet-formed using microreactor study, gas (N-2 and N2O) adsorption and X-ray photoelectron and Fourier transfer infrared spectroscopies and temperature-programmed desorption. It was found that the high-Zn-level catalyst had better performance, including a substantial (15-25%) increase in methanal yield and some other advantages under identical conditions imitating industrial process. The high catalytic activity is ascribed to the high concentrations of Cu, Zn, and oxygen vacancies detected on the surface of the high-Zn catalyst. It is proposed that the active center is Cu square ZnO and that the catalytic process may follow a carbonate-formate-methoxy-methanol mechanism. The high Zn level of the catalyst facilitates the hydrogen heterolysis with the presence of Cu, resulting in the high concentration of oxygen vacancies, as well as the existence of more Cu1+ ions on thr surface, and thus leading to the increased CO/CO2 adsorption, activation, and conversion.

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

The Effect of Mixing on Co‐precipitation and Evolution of Microstructure of Cu‐ZnO Catalyst

Effect of Turbulence in Micro‐reactors on Ultrafast Competitive Reactions in Cu‐Zn Co‐precipitation

Advantage of Microreactor on the Synthesis of High-Activity Cu-Mn Catalyst by Co-Precipitation

The Effect of Cu–Zn Distribution in Zincian Malachite on the Formation of Individual CuO and ZnO Particles

High-performance Cu/ZnO Catalysts Prepared Using a Three-Channel Microreactor

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Effect of Water Layer in a Microreactor on the Low-Temperature Synthesis of High-Activity Cu/ZnO Catalysts

OPTIMIZATION OF Cu/ZnO/Al2O3 CATALYST COATINGS

On-Board Production of Hydrogen for Fuel Cells over Cu/Zno/Al2o3 Catalyst Coating in A Micro-Channel Reactor

Promotional Effects of Cu O on the Activity of Cu/ZnO Catalyst Toward Efficient CO Oxidation

Size Effect of Cu Particles on Interface Formation in Cu/ZnO Catalysts for Methanol Synthesis

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

Influence of Preparation Method on the Catalytic Activities of Cuo/Ce0.67zr0.33o2 Catalysts in Co + O-2 Reaction

PREPARATION OF CuO/ZnO CATALYST FOR METHANOL SYNTHESIS BY CARBON DIOXIDE HYDROGENATION I. Preparation Methods

Active site structure study of Cu/Plate ZnO model catalysts for CO2 hydrogenation to methanol under the real reaction conditions

The Influence of the Preparation on the Catalytic Performance of Cu/ZrO2 for the Steam Reforming of Methanol

Comparative Surface Studies of High-Zn-level and Commercial Cu/ZnO/Al<sub>2</sub>O<sub>3</sub>Catalysts

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol