Abstract:The supercritical hydrothermal synthesis of nanomaterials has gained significant attention due to its straightforward operation and the excellent performance of the resulting products. In this study, the supercritical hydrothermal method was used with Zn(CH3COO)2·2H2O as the precursor and deionized water and ethanol as the solvent. Nano-ZnO was synthesized under different reaction temperatures (300~500 °C), reaction times (5~15 min), reaction pressures (22~30 MPa), precursor concentrations (0.1~0.5 mol/L), and ratios of precursor to organic solvent (C2H5OH) (2:1~1:4). The effects of synthesis conditions on the morphology and size of ZnO were studied. It was found that properly increasing hydrothermal temperature and pressure and extending the hydrothermal time are conducive to the more regular morphology and smaller size of ZnO particles, which is mainly achieved through the change of reaction conditions affecting the hydrothermal reaction rate. Moreover, the addition of ethanol makes the morphology of nano-zno more regular and significantly inhibits the agglomeration phenomenon. In addition to the change in physical properties of the solvent, this may also be related to the chemical bond established between ethanol and ZnO. The results show that the optimum synthesis conditions of ZnO are 450 °C, 26 MPa, 0.3 mol/L, 10 min, and the molar ratio of precursor to ethanol is 1:3.

Synthesis of ZnO Particles by Microchannel Technology

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

The Effect of Mixing on Co‐precipitation and Evolution of Microstructure of Cu‐ZnO Catalyst

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Preparation of nano-ZnO in membrane dispersion micro-reactor and modeling

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Preparation of ZnO nanoparticles using the direct precipitation method in a membrane dispersion micro-structured reactor

Microfluidics-enabled rational design of ZnO micro-/nanoparticles with enhanced photocatalysis, cytotoxicity, and piezoelectric properties

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Preparation and Photoluminescence of ZnO with Nanostructure by Hollow-Cathode Discharge

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Supercritical hydrothermal synthesis of nano-ZnO: Effects of key parameters and reaction mechanism

High-performance Cu/ZnO Catalysts Prepared Using a Three-Channel Microreactor

Synthesis and Characterization of Nanoparticle Semiconductor Materials (ZnO) by Hydrothermal Technique

A New Reaction to Zno Nanoparticles

Systematic synthesis of ZnO nanostructures.

Facile and Controllable Growth of ZnO 1D Nanostructure Arrays on Zn Substrate by Hydrothermal Process

Morphology-Controllable synthesis of ZnO nano-/Micro- Structures by a solvothermal process in ethanol solution