Abstract:A high soluble and stable epsilon-Zn(OH)(2) precursor is synthesized at below room temperature to efficiently prepare ZnO whiskers. The experimental results indicate that the formation of ZnO whiskers is carried out mainly via two steps: the formation of ZnO seeds from epsilon-Zn(OH)(2) via the in situ solid conversion, and the following growth of whiskers via dissolution-precipitation route. The decrease of temperature from 25 to 5 degree celsius promotes the formation of epsilon-Zn(OH)(2) with higher solubility and stability, which balances the conversion and dissolution rates of precursor. The Rietveld refinement, DFT calculations and MD simulations reveal that the primary reason for these characteristics is the expansion of e-Zn(OH)(2) lattice due to temperature, causing difficulties in the dehydration of adjacent OH. Simultaneously, the larger specific surface area favors the dissolution of epsilon-Zn(OH)(2). Based on this precursor, well-dispersed ZnO whiskers with 9.82 mu m in length, 242.38 nm in diameter, and an average aspect ratio of 41 are successfully synthesized through a SDSN-assisted hydrothermal process at 80 degree celsius. The process has an extremely high solid content of 2.5% (mass ratio of ZnO to solution) and an overall yield of 92%, which offers a new approach for the scaled synthesis of high aspect ratio ZnO whiskers by liquid-phase method.

Influence of the mixing ways of reactants on ZnO morphology

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

The Effect of Mixing on Co‐precipitation and Evolution of Microstructure of Cu‐ZnO Catalyst

Preparation of ZnO/SiO_2 Nanoparticle by Adsorption Phase Reaction Technique

Hydrothermal Synthesis of ZnO Whiskers from Ɛ-Zn(oh)2 in NaOH/Na2SO4 Solution

Control of ZnO Morhpology by Solution Route

Controllable Morphology of ZnO Nanostructures Via a Solvothermal Route

Effects of NaOH on Formation of ZnO Nanorods from Ε-Zn(oh)2

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Synthesis and Mechanism of 1D ZnO Based on Alkaline Dissolution‐Conversion Strategy of High Stable and Soluble Ɛ‐zn(oh)2

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Formation of ZnO Rods with Varying Diameters from Ε-Zn(oh)2

Zno Microcrystals With Diverse Morphologies

Preparation of ZnO Particles by Precipitation Transformation Method and Its Inherent Formation Mechanisms

Synthesis of ZnO Whiskers Via Hydrothermal Decomposition Route

Hydrothermal synthesis of zinc oxide powders with different morphologies

Synthesis and electromagnetic characteristics of ZnO micro-crystal with varying morphology

Morphology Controlling and Optical Property of ZnO Prepared by Hydrothermal Method

Influence of Water Soluble Polymer on ZnO Nanopowder by Chemical Liquid-Phase Method