Abstract:The direct DME synthesis from syngas was studied by using activated carbon-based bifunctional catalytic beds. Two kinds of activated carbons, prepared by physical (by CO 2 partial gasification) and chemical (with phosphoric acid) activation of olive stones, were used as supports for the preparation of the catalysts. The chemically activated carbon presented a considerable amount of thermally and chemically stable surface phosphorus complexes, which played an important role on the catalytic performance of the prepared catalysts. A Zr-loaded P-containing activated carbon presented a relatively high activity, selectivity and stability for the production of DME from methanol and was used as methanol dehydration catalyst. On the other hand, Cu-Zn was loaded on both P-containing and P-free activated carbon supports for the preparation of methanol synthesis catalysts. The presence of surface-phosphorus on the carbon support resulted in a strong metal-support interaction, hindering the catalytic activity for the hydrogenation of CO to methanol. However, the catalyst that did not contain phosphorus showed noticeable activity for this reaction. The physical mixing of the methanol synthesis and methanol dehydration catalysts resulted in the preparation of carbon-based bifunctional catalytic beds, which performed very efficiently in the direct DME synthesis from syngas in a fixed-bed reactor. Different mass ratios of the individual (metallic and acid) catalysts were studied. An acid/metallic catalyst mass ratio of 2 provided the catalytic bed with enough acid sites to promote methanol dehydration to its maximum extent and make the overall product distribution controlled by the methanol synthesis reaction on the metallic phase.

Pilot-Scale Tests of Direct Dimethyl Ether Synthesis from Biomass-Derived Syngas

Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production

One-step synthesis of dimethyl ether from biomass-derived syngas on CuO-ZnO-Al2O3/HZSM-5 hybrid catalyst: Combination method, synergistic effect, water-gas shift reaction and catalytic performance

Thermodynamic Simulation of Direct DME Synthesis via Biomass Gasification

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Synthetic fuels and chemicals production from biomass synthesis gas

Hydrodynamic effects on the direct conversion of syngas to methyl acetate in a two-stage fixed-bed/fluidized-bed combined reactor

Direct synthesis of ethanol from dimethyl ether and syngas over combined H-Mordenite and Cu/ZnO catalysts.

Catalytic Pyrolysis of Corn Dried Distillers Grains with Solubles to Produce Hydrocarbons

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO

Study on synthesis of dimethyl ether from syngas obtained by biomass gasification

Biomass-derived activated carbon catalysts for the direct dimethyl ether synthesis from syngas

Study on Synergy Effect in Dimethyl Ether Synthesis from Syngas

Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

One-step Synthesis of Dimethyl Ether from Semi-water Gas for Industrial Trial Production

Dimethyl Ether Synthesis from Methanol and Syngas over Different Sized HY Zeolite and Cu-Mn-Zn/HY Bifunctional Catalyst

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Catalytic performance of CuZnAl slurry catalyst prepared by complete liquid phase technology for direct synthesis DME from syngas

Equilibrium calculations for direct synthesis of dimethyl ether from syngas

Cu–Mn–Al based catalyst for the direct syngas to dimethyl ether conversion