Abstract:Multi-walled carbon nanotubes (MWCNTs) and graphene nanosheets (GNs) were used as thermal conductivefiller, epoxy resin (EP) was used as matrix,the EP/GNs/MWCNTs composites were prepared by solvent and ultrasonic dispersion method,the thermal conductive property of which was comparedto EP/MWCNTs and EP/GNs composites. Transmission electron microscope were used to analyze the microstructure of the composites. Hot Disk thermal conductivity meter was used to measure the thermal conductivity of the composites. Differential scanning calorimetry and thermal gravimetric analyzer were used to analyze the heat resistance and thermal stability of the composites. The experimental results demonstrate that it’s easier to form thermal conductive network in composites using the mixedfillers MWCNTs and GNs than using one single kind. The thermal conductiv-ity,glass transition temperature (Tg) and thermal decomposition temperature of EP increase gradually as the content of MWCNTs or GNs increases. Among these,GNs is more beneficial to improve the thermal conductivity and thermal decomposition temperature, MWCNTs is more beneficial to improveTg. Under the same contents of thefillers,the composites with mixedfiller does better than the one with single kind offiller in improving heat-conductivity properties,and the thermal conductivity of the composites increase as the content of GNs in the mixing GNs/MWCNTsfillers increases. When the volume fraction of GNs and MWCNTs is 0.6% and 0.4% respectively,the thermal conductivity,Tg and initial thermal decomposition temperature of EP/GNs/MWCNTs composite is 0.565 W/(m·K),152℃ and 316℃ separately,which improves by 132.5%,34.5% and 8.2% compared with pure EP.

A Study on the Thermal Conductivity of Multiwalled Carbon Nanotube/Polypropylene Composite

Thermophysical Properties of Paraffin-Based Composite Phase Change Materials Filled with Carbon Nanotubes

Improved Thermal Conductivity of Epoxy Composites Prepared with A Mixed Filler of Multiwalled Carbon Nanotubes and Aluminum Nitride Particles

Thermal Conductivity of EP/GNs/MWCNTs Composites

Anisotropic Thermal Transport in Thermoelectric Composites of Conjugated Polyelectrolytes/Single-Walled Carbon Nanotubes

Preparation and thermoelectric properties of polythiophene/multiwalled carbon nanotube composites

Electrical Conductivity and Thermal Sensing of CNTs/Polymer Nanocomposites

Contact Thermal Resistance Between Individual Multi-Wall Carbon Nanotubes

The Thermal and Mechanical Properties of a Polyurethane/multi-Walled Carbon Nanotube Composite

A Holistic Evaluation of the Influence of Shear Rates and Matrix Viscosity on the Properties of Polypropylene/multi‐walled Carbon Nanotubes Composites

Experimental Study on Thermal Conduction Performance of CNTs Materials

Remarkable microwave heating performance of MWCNTs/polypropylene composites verified by electromagnetic-thermal coupling experiment and simulation

Studies on conductive properties and mechanism of composites-sulfonated polyphenylacetylene/multiwalled carbon nanotubes

The Specific Heat and Effective Thermal Conductivity of Composites Containing Single-Wall and Multi-Wall Carbon Nanotubes.

Simulation Study on Flow Dependent Thermal Conductivity of PC/MWCNTs Nanocomposites Considering Interface Topography

Multi-walled carbon nanotube reinforcement in polypropylene nanocomposites: comprehensive analysis of thermal behavior, mechanical properties, and dispersion characteristics

Study on the Conductivity of Multiwalled Carbon Nanotubes Filled Polycarbonate/Styrene-series Polymer Composites

Electrical behavior of polypropylene/multiwalled carbon nanotube nanocomposites with low percolation threshold

Study on Conductive Mechanism of Composites―Sulfonated Polyphenylacetylene / Multiwalled Carbon Nanotubes

Anisotropic Thermal Property of Magnetically Oriented Carbon Nanotube Polymer Composites

Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites