Abstract:The schematic structure evolution of PP/PA6/CNT composites in microinjection molding, and a comparison of electrical conductivity for samples prepared with different host matrices and processing methods. Microinjection molding (μIM) is characterized by high shearing and cooling rates, resulting in higher a degree of filler orientation which impairs the electrical conductivity (σ) of conductive filler‐containing polymer composites when compared with that of compression molding and conventional injection molding processes. In this study, polypropylene/polyamide 6/multiwalled carbon nanotubes (PP/PA6/CNT) composites were used as the model system to investigate how blending sequence, injection speed, and component mass ratios affected the morphology and σ of PP/PA6/CNT microparts. The results demonstrated that CNTs exhibited a higher affinity for the polar PA6 phase and they tended to be preferentially distributed in PA6 domains. The deformation and coalescence of CNT‐rich PA6 phase promoted the creation of an intact and continuous filler network structure along the flow direction under the influence of high shearing conditions in μIM. When the mass ratio of PP:PA6 was 70:30 and the concentration of CNT was 7 wt%, the micropart possessed the highest σ (1.2 × 10−6 S/m) when compared with their PP/CNT (4.4 × 10−9 S/m) and PA6/CNT (3.4 × 10−10 S/m) counterparts. Higher injection speeds resulted in higher degree of CNT orientation, which negatively affected the σ of subsequent moldings. This work established an approach for producing electrically conductive microparts that demonstrate promising applications in the fields of electronics, automotive, and microsystems among others. Highlights PP/PA6/CNT composites were used as model systems for microinjection molding. The electrical conductivity was improved by shear‐induced deformation of CNT‐rich phase. The properties of PP/PA6/CNT microparts were affected by process parameters.

Comparative study on the electrical, thermal, and mechanical properties of multiwalled carbon nanotubes filled polypropylene and polyamide 6 micromoldings

Properties of polyphenylene sulfide/multiwalled carbon nanotubes composites: a comparison between compression molding and microinjection molding

Improving the electrical conductivity of multiwalled carbon nanotubes‐containing micromoldings via in situ construction of electrically conductive networks

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes

Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Mechanical Properties and Electrical Conductivity of Poly(methyl methacrylate)/Multi-walled Carbon Nanotubes Composites

Preparation and Electrical Properties of Multiwalled Carbon Nanotubes Filled High-density Polyethylene Composites

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Effects of Carbon Nanotubes on the Morphology and Properties of Uncompatibilized and Maleic Anhydride-grafted Polypropylene-compatibilized Polyamide 6/polypropylene Blends

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Influence of Carbon Nanotubes with Different Functional Groups on the Morphology and Properties of Ppo/Pa6 Blends

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Multi-walled carbon nanotube reinforcement in polypropylene nanocomposites: comprehensive analysis of thermal behavior, mechanical properties, and dispersion characteristics

Thermal Properties and Thermal Stability of PP/MWCNT Composites

Melt rheological properties of nylon 6/multi-walled carbon nanotube composites

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

The improved viscoelastic properties of long‐length carbon nanotubes reinforced polyamide‐6 composites

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene