Abstract:Polymers reinforced with conducting fibers to achieve electrical conductivity have attracted remarkable attention in several engineering applications, and injection molding provides a cost-effective way for mass production. However, the electrical performance usually varies with the molding conditions. Moreover, high added content of conducting fibers usually results in molding difficulties. In this study, we propose using microcellular (MuCell) injection molding for polypropylene (PP)/carbon fiber (CF, 20, and 30 wt%) composites and hope that the MuCell injection molding process can improve both electrical and mechanical performance as compared with conventional injection molded (CIM) parts under the same CF content. Both molding techniques were also employed with and without gas counter pressure (GCP), and the overall fiber orientation, through-plane electrical conductivity (TPEC), and tensile strength (TS) of the composites were characterized. Based on the various processing technologies, the results can be described in four aspects: (1) Compared with CIM, microcellular foaming significantly influenced the fiber orientation, and the TPECs of the samples with 20 and 30 wt% CF were 18-78 and 5-8 times higher than those of the corresponding samples molded by CIM, respectively; (2) when GCP was employed in the CIM process, the TPEC of the samples with 20 and 30 wt% CF increased by 3 and 2 times, respectively. Similar results were obtained in the case of microcellular injection molding-the TPEC of the 20 and 30 wt% composites increased by 7-74 and 18-32 times, respectively; (3) although microcellular injection molding alone (i.e., without GCP) showed the greatest influence on the randomness of the fiber orientation and the TPEC, the TS of the samples was the lowest due to the uncontrollable foaming cell size and cell size uniformity; (4) in contrast, when GCP was employed in the microcellular foaming process, high TS was obtained, and the TPEC was significantly enhanced. The high foaming quality owing to the GCP implementation improved the randomness of fiber orientation, as well as the electrical and mechanical properties of the composites. Generally speaking, microcellular injection combined with gas counter pressure does provide a promising way to achieve high electrical and mechanical performance for carbon-fiber-added polypropylene composites.

Improving the electrical conductivity of multiwalled carbon nanotubes‐containing micromoldings via in situ construction of electrically conductive networks

Properties of polyphenylene sulfide/multiwalled carbon nanotubes composites: a comparison between compression molding and microinjection molding

Fabrication of electrically conductive microparts by constructing carbon black-rich network under high shear conditions in microinjection molding

Comparative study on the electrical, thermal, and mechanical properties of multiwalled carbon nanotubes filled polypropylene and polyamide 6 micromoldings

Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites

Processing Effects on the Through-Plane Electrical Conductivities and Tensile Strengths of Microcellular-Injection-Molded Polypropylene Composites with Carbon Fibers

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Skin-Core Micro-Structure and Surface Orientation of Carbon Nanotube Composites by Injection Molding Process

Improved Yield and Electrical Properties of Poly(Lactic Acid)/Carbon Nanotube Composites by Shear and Anneal

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Research on the thermal conductivity and mechanical properties of carbon fiber reinforced thermoplastic composites doped with different sizes carbon nanotubes: A combination of experiments, numerical simulations and multi‐objective optimization

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Improved mechanical and electromagnetic interference shielding performance of segregated UHMWPE/CNTs via microwave-assisted sintering

Improved Dielectric Performance of Polypropylene/ Multiwalled Carbon Nanotube Nanocomposites by Solid-Phase Orientation

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content of hybrid nanofiller

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

High-Performance PEEK/MWCNT Nanocomposites: Combining Enhanced Electrical Conductivity and Nanotube Dispersion

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes

Poly(lactic acid)/carbon nanotube composites with enhanced electrical conductivity via a two-step dispersion strategy