Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

The prediction and control on the springback of the front inner panel of automobile at multi-steps stamping

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Spring Back Behavior of Large Multi-Feature Thin-Walled Part in Rigid-Flexible Sequential Loading Forming Process

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Investigation on the effect of friction and material behavior models on the springback simulation precision: application to automotive part B-Pillar and material TRIP800 steel

Analytical springback assessment and compensation in 3D multi-point flexible stretch bending forming

Springback compensation for a vehicle’s steel body panel

Research on ANN-based Model Used to Predict the Springback of Stamping

Improving the Accuracy of Stamping Analyses Including Springback Deformations

Stamping Process Optimization for the Rear Part of Door Inner Pane(lContinued 1)

An Adaptive Design Method for Understanding Tolerance in the Precision Stamping Process

A 6-Sigma Robust Optimization Method for Stamping Forming of Automobile Covering Parts Based on Residual Error and Radial Basis Interpolation

Springback prediction of 7075 aluminum alloy V-shaped parts in cold and hot stamping

Springback compensation of multiple-step incremental air-bending forming of sheet-metal

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Numerical Simulation And Experimental Method For Auto-Panel Forming Defects Analysis

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

Research on springback compensation method of 3D flexible stretch bending of multi-point roller dies