Abstract:Most reinforcement plates in aircraft engines comprise nickel-based alloys and are shaped using bending. However, the nonlinear behavior of materials makes it difficult to predict the springback following component bending, thereby leading to quality issues. Increasing the accuracy of springback prediction is therefore a crucial issue in the field of stamping. This study examined the bending and springback behavior of nickel-based alloy HAYNES 230. First, we obtained the minimum bending radius and forming properties of the nickel-based alloy at room temperature. Next, we used the finite element analysis software DEFORM to collect springback data related to the U-bending of nickel-based alloy HAYNES 230. The primary forming factors were punch round radius (Rp), cavity round radius (Rc), die clearance (Dc), and forming velocity (Fv). We performed an 81-combination full factor experiment to establish the adaptive neuro-fuzzy inference system (ANFIS) prediction model and then used the median of each factor parameter to perform a 16-combination full factor experiment to validate the prediction model. We trained the ANFIS prediction model using the following four membership functions: a triangular membership function, a trapezoidal membership function, a bell-shaped membership function, and a Gaussian membership function. To find the correlation between each membership function and the data and confirm the error of the prediction model, we calculated the coefficients of the correlation between the results derived from the four membership functions and the analysis or experiment results. The results derived from the Gaussian membership function were most highly correlated with both the analysis and experiment results. ANOVA of the full factor experiments indicated that the contributions of Rp, Rc, Dc, and Fv were 65.554%, 2.072%, 29.585%, and 0.768%, respectively. The factor with the greatest impact on springback was Rp.

Research on ANN-based Model Used to Predict the Springback of Stamping

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Springback Prediction in the Stamping Forming Process Based on Ant Colony Optimization Algorithm and BP Neural Network

Prediction of springback in metal forming of diaphragm of automotive horn based on BPANN

Dynamic Evaluation Method of Straightness Considering Time-Dependent Springback in Bending-Straightening Based on GA-BP Neural Network

Incremental sheet NC forming springback prediction using genetic neural network

Smart Control of Springback in Stretch Bending of a Rectangular Tube by an Artificial Neural Network

Prediction of Spherical Sheet Springback Based on a Sparrow-Search-Algorithm-Optimized BP Neural Network

Application of ANFIS to predict springback in U-bending of nickel-based alloy

The prediction and control on the springback of the front inner panel of automobile at multi-steps stamping

Quality prediction and rivet/die selection for SPR joints with artificial neural network and genetic algorithm

Error Prediction of Springback in Bending Process Based on GA-BPNN for Accurate Forming Angle

Numerical Modeling of Parameters Optimization of Sheet Metal Forming in Drawing Process Based on Artificial Neural Network

Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

Springback Study on Profile Flexible 3D Stretch-Bending Process Using the Neural Network

Improving the Accuracy of Stamping Analyses Including Springback Deformations

Modelization And Simulation Of Sheet Forming Process Closed-Loop Control System Based On Time Series Analysis Theory

Analytical prediction of springback based on residual differential strain during sheet metal bending

Springback prediction of 7075 aluminum alloy V-shaped parts in cold and hot stamping

Springback prediction method for double-curved workpiece considering plate anisotropy in multi-point forming