Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

Springback prediction of 7075 aluminum alloy V-shaped parts in cold and hot stamping

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test

Pre-stretching Process and Its Application in Reducing Residual Stress of Quenched 7075 Aluminum Alloy Thick-Plates

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect

FEM Analysis of Spring-backs in Age Forming of Aluminum Alloy Plates

Improvement of flanging accuracy with small springback and service performance of AA7075 using high-speed forming

Time-dependent springback prediction with stress relaxation effect for non-isothermal hot stamping of titanium alloy sheets

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Improving the Accuracy of Stamping Analyses Including Springback Deformations

An efficient closed-form solution for springback prediction and compensation in elastic–plastic creep age forming

Spring Back Behavior of Large Multi-Feature Thin-Walled Part in Rigid-Flexible Sequential Loading Forming Process

M–K model based forming limit prediction of aluminum–lithium alloy 2060 and its application in hot stamping

Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with corner

Springback prediction method for double-curved workpiece considering plate anisotropy in multi-point forming

A novel finite element simulation of hot stamping process of DP780 steel based on the Chaboche thermomechanically hardening model

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions