Abstract:This paper analyses the structural element of a vehicle which is made from High Strength Steels. Application of this kind of material considerably reduces construction mass due to its high durability. Nevertheless, it also results in the appearance of springback that depends mainly on the material used, as well as the specific part being fabricated. Springback reduction helps to reach the reference geometry of the element by using Finite Element Method software. The authors compared two methods for optimisation of die shape. The first method defines the compensation of the die shape only for OP-20 and the second, multi-operational, method defines the compensation of the die shape for the OP-20 and OP-50 operations. Prediction of springback by the trial-and-error method is difficult and labour intensive. The design of dies requires the use of the appropriate FEM software to make the dies more economical and less time consuming. Virtual compensation methods make it possible to receive precise results in a short time. Die compensation with software application was experimentally verified by the prototype die. Therefore, springback deformation becomes a critical problem especially for HSS steel when the geometry is complex.

Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

Eliminating Springback Error in U-Shaped Part Forming by Variable Blankholder Force

A Compensation Algorithm of Springback Error in Complex 3D Sheet Metal Forming and Experiment Validation

Springback Control of Sheet Metal Forming Based on the Response-Surface Method and Multi-Objective Genetic Algorithm

The Numerical Simulation of U-channel Springback and Optimization of Forming Parameters

Bending die design of leaf spring based on iterative springback compensation

Study on Process Parameters and Springback Rule for Stamping of High Strength Steel Sheet

Research on the control of the warpage springback induced by non-uniform local deformation

Investigation of Springback Behavior and Process Control for Stamping of Ring-Shaped Workpiece

Novel Strategies to Reduce the Springback for Double-Sided Incremental Forming

Study of Multi-circle Auto Panel Forming Spring-back

Springback compensation for a vehicle’s steel body panel

Numerical Analysis of Springback in the Stamping of Tailor Welded Blanks

Springback compensation of multiple-step incremental air-bending forming of sheet-metal

Study on the Influencing Factors and Forming Process Selection of Sheet Metal Bending Spring Back Defects

A New Approach of Die Shape Optimization for Sheet Metal Forming Processes

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Research on springback compensation method of 3D flexible stretch bending of multi-point roller dies

SPRINGBACK CALCULATION AND TOOL MODIFICATION IN SHEET METAL FORMING

Numerical Simulation and Parameter Optimization in Forming Process of an Automobile Squab Panel