Abstract:Near-stoichiometric lithium tantalate (NSLT) crystal wafers were prepared by a vapour transfer equilibrium (VTE) method. The electrical, thermal and mechanical properties of NSLT wafers were tested by the four-probe method, laser pulse thermal conductivity and Vickers hardness testing. It was found that with the increasing Li content in the crystal, the conductivity of NSLT wafer first decreases, then increases and then decreases once more. The maximum conductivity of 4.4 × 10 − 12 Ω −1 cm − 1 is measured when the Li content is 49.64%. By analysing the thermal and mechanical properties of NSLT wafers with different Li contents, it was observed that the thermal conductivity of NSLT wafers first increases and then decreases with gradually increasing Li content. The thermal conductivity reaches a maximum value of 4.6 W/(m K) when Li content is 49.75%. Vickers hardness decreases significantly with Li diffusion and then increases slowly. In this study, wafers with Li content between 49.64 and 49.75% have more excellent electrical and thermal properties, but the Vickers hardness of the wafer does not reach its ideal value. Here, it is considered that there is an optimal Li content in the application of NSLT crystals in electronics, heat and mechanics, which is not necessarily the closest to the stoichiometric ratio.

Room Temperature Electrical Poling Technology of Stoichiometric Lithium Tantalate for Parametric Oscillator

Electrical-Poling Technology of Lithium Tantalate for Quasi-Velocity-Matching Phase Modulator

Fabrication of Homogenous Periodically Poled Stoichiometric Lithium Tantalate Wafer

Research on Defects and Domain Characteristics of MgO-doped Near-Stoichiometric Lithium Tantalate in Room-Temperature Polarization Process

Periodic poling of thin-film lithium tantalate by applying a high-voltage electric field

LiTaO3 Crystal Periodically Poled by Applying an External Pulsed Field

Domain Structure Moving Characterization of Near-Stoichiometric Lithium Tantalate

Domain structure inversion characterization of near stoichiometric lithium tantalate

GROWTH OF MgO-DOPED NEAR-STOICHIOMETRIC LITHIUM TANTALATE CRYSTAL AND ITS OPTICAL CHARACTERIZATION

Study of the crystalline and optical properties of lithium tantalate thin films deposited by high power RF magnetron sputtering

Powder Synthesis and Properties of LiTaO3 Ceramics

532 nm pumped optical parametric oscillator using periodically-poled stoichiometric LiTaO3

Etching Study of Poled Lithium Tantalate Crystal Using Wet Etching Technique with Ultrasonic Assistance

Growth of ferroelectric lithium niobate-tantalate LiNb(1-x)TaxO3 crystals

Modulation on structure and electric properties by tantalum of lead‐free NaNbO3 ceramics

Fabrication of a lithium tantalate temperature-stabilized optical modulator

Room-temperature ferroelectricity in A-site ordered Ruddlesden-Popper Li2CaTa2O7 ceramics

Hydrothermal and wet-chemical synthesis of pure LiTaO3 powders by using commercial tantalum hydroxide as starting material

Room temperature spin polarized magnetic semiconductor

Preparation, electrical, thermal and mechanical properties of near-stoichiometric lithium tantalate wafers

Study on Properties of Tantalum-Doped La2Ti2O7 Ferroelectric Ceramics