Abstract:Ferroelectric LiNbO3 single crystals have piezoelectric, pyroelectric and electro-optic properties and are widely used in nonvolatile memories, sensors, and electro-optic modulators. The material is hard and relatively inert for dying etching using thick Cr/Ni mask layers which are incompatible with the CMOS manufacturing technologies. Moreover, the etching angles are generally below 80 degrees that could result in poor polarization retention and a large imprint effect. Here we developed an etching technique on the basis of the solid-state reaction and wet solution corrosion together that used CMOS-compatible SiO2 masks to fabricate large arrays of LiNbO3 nanodevices in high precision. The LiNbO3 nanopatterns at the regions beyond the SiO2 masks can react with the deposited Al metal below 500 degrees C in formation of amorphous layers in targeted thicknesses that vary with the annealing temperature and time at a reduced atmosphere. The amorphous layers can be dissolved in mixed solutions of H2O, NH4OH, and H2O2 at 85 degrees C, and the etching angles of memory cells in lateral sizes of 20-220 nm can approach 90 degrees after the passivation of the LiNbO3 surface layer. The transmission electron microscope study shows the oxygen deficiency at the surface. After the connection of the cell to two side electrodes, domain switching occurs under an applied horizontal electrode field along the polar Z-axis accompanying the formation of conducting domain walls against the peripheral unswitched domain at the substrate. The read current can highly reach the level of 2-20 mu A in high reliability. This etching technique promotes the large-scale fabrication of LiNbO3 nanodevices on the Si platform.

Etching Study of Poled Lithium Tantalate Crystal Using Wet Etching Technique with Ultrasonic Assistance

Domain dynamics in stoichiometric lithium tantalate revealed by wet etching and on-line second harmonic generation

Research on Defects and Domain Characteristics of MgO-doped Near-Stoichiometric Lithium Tantalate in Room-Temperature Polarization Process

Domain Structure Moving Characterization of Near-Stoichiometric Lithium Tantalate

FEATURES OF PLASMA CHEMICAL ETCHING OF LITHIUM TANTALATE SUBSTRATE (LiTaO3)

Electrical-Poling Technology of Lithium Tantalate for Quasi-Velocity-Matching Phase Modulator

Domain structure inversion characterization of near stoichiometric lithium tantalate

Fabrication of Homogenous Periodically Poled Stoichiometric Lithium Tantalate Wafer

Periodic poling of thin-film lithium tantalate by applying a high-voltage electric field

In Situ Study Wet Chemical Etching of ZnO Nanowires with Different Diameter and Polar Surfaces by LCTEM

In Situ Study of Wet Chemical Etching of ZnO Nanowires with Different Diameters and Polar Surfaces by LCTEM

Transformation of initial domain structure by ac electric field in lithium tantalate crystals with composition gradient

Enhanced Surface Blistering Efficiency of H + Implanted Lithium Tantalate by Chemical Reduction Modification

The Creation of a Domain Structure Using Ultrashort Pulse NIR Laser Irradiation in the Bulk of MgO-Doped Lithium Tantalate

Preparation, Properties, and Applications of Near Stoichiometric Lithium Tantalate Crystals

Synthesis and Characterization of Lithium Tantalate Thin Films Fabricated by Sol-Gel Method

Unraveling Anisotropic and Pulsating Etching of ZnO Nanorods in Hydrochloric Acid via Correlative Electron Microscopy

Room Temperature Electrical Poling Technology of Stoichiometric Lithium Tantalate for Parametric Oscillator

Preparation and characterization of lithium tantalate thin films using a high-concentration precursor solution

Nanometer-sized Etching of Lithium Niobate Domain Wall Devices

Impact of the Crystal Orientation of Fe-doped Lithium Niobate on Photo-Assisted Proton Exchange and Chemical Etching.