Abstract:Flexible tantalum (Ta) capacitors with ultra‐thin and ultra‐high capacitance density are prepared based on nano‐porous Ta foil obtained by direct current pulse etching. Its capacitance density is higher than all commercially available embedded capacitors reported to date. This work provides a valuable reference for the large‐scale application of the embedded capacitor in advanced packaging technology. Although embedded capacitors have been applied and researched for many years, their large‐scale application still faces challenges such as low capacitance density, high thickness, high cost, and incompatibility with integrated processes. In this work, a breakthrough has been made in the fabrication of ultra‐thin tantalum (Ta) capacitors with ultra‐high capacitance density that can be used for 3D packaging. The key to these excellent performances is the application of Ta foil with nano‐porous structure to the anode of the capacitor. The Ta foil with high specific surface area (SSA) is successfully prepared by direct current pulse etching. At a current density of 15 mA cm−2, a pulse frequency of 50 Hz, and a duty cycle of 30%, the SSA of Ta foil is increased by 76 times after etching in an electrolyte with 0.01 v% TOA for 30 min. Based on this, Ta capacitors with a form factor of less than 40 μm, showing a capacitance density of 750 nF mm−2 and a leakage current of less than 2.1 × 10−7 A at 8 V is successfully fabricated. To the best of the authors' knowledge, this is the highest capacitance density reported to date for the mentioned form factors.

Surface enlargement of tantalum capacitor foils by pulsed direct current etching and laser cladding

Surface Modification of Al Foils for Aluminum Electrolytic Capacitor

High-Capacitance Thin Film Tantalum Electrolytic Capacitor Fabricated from Electrochemically Etched Tantalum Foils

A key factor in determining the effectiveness of etchants for electrochemical surface enlargement of Ta foil for electrolytic capacitor

On the etching mechanism of surface area enlarging of aluminum foils used as high-voltage electrolytic capacitors anodes

An Ultra‐Thin, Ultra‐High Capacitance Density Tantalum Capacitor for 3D Packaging

Surface Diffusion Enhancement of Titania by Surface Fluorine Modification to Boost Energy Storage Capacities

Investigation of Production Process of Polymer Solid Electrolyte Tantalum Capacitor Based on High Specific Surface Area Tantalum Powder

Effect of Etch Conditions on Expanding Surface Corrosion of Anodic Foil for Aluminum Electrolytic Capacitors

Preparation of Al2O3/TiO2 Composite Film with High Specific Capacitance by Surface Self-assembly Method

Ultrasonic-assisted ac etching of aluminum foils for electrolytic capacitor electrodes with enhanced capacitance

Improvement upon anode oxide film on etched aluminum foil for electrolytic capacitor

Formation and Property of Al2O3-TiO2 Composite Anodic Oxide Film on DC-Etched Al Foil for Al Electrolytic Capacitors

Self-healing Solid Tantalum Electrolytic Capacitors with Low ESR, High-Frequency Performance, and Simple Fabrication

Formation of Al2O3–BaTiO3 composite thin film to increase the specific capacitance of aluminum electrolytic capacitor

Design of La-based MG-Ta composite with high and tailorable properties for solid Ta electrolytic capacitor

(Ba0.5Sr0.5)TiO3 modification on etched aluminum foil for electrolytic capacitor

Laser‐Induced Transient Self‐Organization of TiN X Nano‐Filament Percolated Networks for High Performance Surface‐Mountable Filter Capacitors

Hierarchically Mesostructured Aluminum Current Collector for Enhancing the Performance of Supercapacitors.

Morphological Evolution of Corrosion Pits on the (200) and (211) Surfaces of Tantalum Foil

Microstructure Evolution and Performance Enhancement of Sintered Aluminum Foils for Aluminum Electrolytic Capacitors