Abstract:Substantial soil deformation around tail-grouting activity is frequently observed during the shield tunnelling process in the sandy cobble strata, which is attributed to the convergence and potential collapse of the soils around the tail-void left behind the shield machine. The stability of the underlying strata is significantly impacted by synchronous grouting inside the tail-void. This study examines four-opening synchronous grouting, which is frequently used in shield tunnelling of metro-tunnels, to analyze the grout-spreading mechanism and soil displacement generated by the synchronous grouting in the sandy cobble layer. Laboratory tests are used to determine the characteristics of grouting mortar and soils in accordance with the similarity theory. The model experiment outcomes show that a rise in the GVR (Grouting-Volume Ratio) can cause the settlement at the ground surface. However, as the GVR improves, the pace of settlement growth diminishes. Additionally, the expanding cover depth of the tunnel contributes to the stability of the soil after synchronous grouting. As observed in the model test, when GVR achieves its maximum amplitude (i.e., GVR = 200 %), the grout mortar cannot spread to the crown of the tail-void, necessitating secondary grouting after the synchronous grouting during tunnelling practice. After grout hardening process, it was discovered that grout material above the tunnel waist was concentrated near the upper grout openings, implying a seepage spreading mode of the grout-mortar at these locations. In contrast, grout material below the tunnel waist was evenly distributed along the periphery of the tail void. The model test outcomes may be utilized as a guide for tail-grouting while shield tunneling in sandy cobble strata.

The Grouting Influence of Shield Tunnelling on Sand-Gravel Soil

Influences of grouting heave on overlying structures in shield tunneling

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Influences of Shield Advance Rate and Abnormal Machine Halt on Tunnelling-Induced Ground Surface Settlements

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

RESEARCH ON SOIL DEFORMATION DURING SHIELD CONSTRUCTION PROCESS

Effect of Grouting Reinforcement on Settlement of Existing Tunnels: Case Study of a New Crossing Underpass

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata

A Case Study of Ground Surface Grouting Reinforcement of Shield Tunnel in Karst Strata with Sandy Soil Cover

Influence of synchronous grouting on surrounding sandy cobbles during shield tunnelling process: Insights from a scaled model test

Study on the Influence of Back-fill Grouting Parameters in Unsaturated Strata on the Seismic Performance of Shield Tunnels

Grout Diffusion in Silty Fine Sand Stratum with High Groundwater Level for Tunnel Construction

Analysis of Coupled Seepage and Stress of Shield Tunnel Launching Accident in Soft Clay

Study on the Floating of Large Diameter Underwater Shield Tunnel Caused by Synchronous Grouting

Influence of grouting on rehabilitation of an over-deformed shield tunnel lining in spatially variable soil

Remediation of Damaged Shield Tunnel Using Grouting Technique: Serviceability Improvements and Prevention of Potential Risks

A computational method proposal on the determination of grouting parameters for shield construction in water-rich earth materials

Experimental Study on Shield Tunneling Control in Full Section Water-Rich Sand Layer of Collapsible Loess

Experimental Study of High Performance Synchronous Grouting Materials Prepared with Clay

Preliminary Mechanical Evaluation of Grouting Concrete as a Protective Layer for Tunnelling