Abstract:The analytical formula of grouting pressure for quasi-rectangular shield is derived, which is more complex than it for circular shield.The influencing factors and corresponding reasons of grout pressure distribution in the special-shaped space are analysed.The fluid motion law of synchronous grouting along unconventional path in shield tail void is revealed clearly.The pressure distribution patterns of grout along the circumferential and longitudinal directions are obtained.Considering that the particular geometric shape of a quasi-rectangular shield, the grout flowing law and its motion process are more complicated than those of a conventional circular shield. To interpret the grouting mechanical behavior in the special-shape shield tail void, the filling and diffusion mechanism of synchronous grouting was analysed. The grout flowing is separated into two independent motion processes, which contains a circumferential filling and a longitudinal diffusion. The theoretical model of the grout pressure spatial distribution was derived based on the principle of fluid mechanics. Then, the pressure distributions in the two directions were obtained using a case study and compared with the field measured data to verify the validation of the model. Although the overall spatial pattern of grout pressure distribution on the tunnel profile show a change trend dominated by the self-weight effect mostly, its local fluctuation characteristics is very abnormal relative to that of a circular shield tunnel. Moreover, the important factors in the model were analysed, including the grout material parameters, the grouting construction parameters, and some geometry parameters. The results show that the pressure loss along this way is positively correlated with the grout flow velocity and is sensitive to the shear yield stress of the grout. The pressure loss along the circumferential direction is the most sensitive to the thickness of the ring cake, and the value range suitable for the model should be 0.02–0.03 m. The pressure loss along the longitudinal diffusion direction is the most sensitive to the size of the tail void. The research results can provide a theoretical basis for the control of special-shape shield construction.

Study on the Floating of Large Diameter Underwater Shield Tunnel Caused by Synchronous Grouting

Influences of grouting heave on overlying structures in shield tunneling

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Research on DOT Shield Tunnel Back-filled Synchronous Grouting Diffusion and Segments Circumferential Pressure Distribution

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata

Disaster mechanism analysis for segments floating of large-diameter shield tunnel construction in the water-rich strata: A case study

Spatial distribution model of the filling and diffusion pressure of synchronous grouting in a quasi-rectangular shield and its experimental verification

Mechanical Analysis of Segment Floating During Shield Tunnel Construction

Effect of Grouting Reinforcement on Settlement of Existing Tunnels: Case Study of a New Crossing Underpass

Study on the Influence of Back-fill Grouting Parameters in Unsaturated Strata on the Seismic Performance of Shield Tunnels

Research and evaluation on Water-dispersion resistance of synchronous grouting slurry in shield tunnel

Remediation of Damaged Shield Tunnel Using Grouting Technique: Serviceability Improvements and Prevention of Potential Risks

A semi‐elliptical surface compound diffusion model for synchronous grouting filling stage in specially shaped shield tunnelling

Multiphase flow coupling analysis of shield synchronous grouting filling law with time-dependent viscosity

Study on the shear strength characteristics and source mechanism of early-age shield synchronous grouting materials

Influence of synchronous grouting on surrounding sandy cobbles during shield tunnelling process: Insights from a scaled model test

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

A computational method proposal on the determination of grouting parameters for shield construction in water-rich earth materials

Study on the escaping condition of backfill grouting based on two-phases flow for shield tunnelling during whole section rock

Displacement infiltration diffusion model of power-law grout as backfill grouting of a shield tunnel

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath