Spatial distribution model of the filling and diffusion pressure of synchronous grouting in a quasi-rectangular shield and its experimental verification

Jun Liu,Peinan Li,Lai Shi,Jie Fan,Xiaoyong Kou,Dezhong Huang

DOI: https://doi.org/10.1016/j.undsp.2021.02.002

IF: 5.327

2021-12-01

Underground Space

Abstract:The analytical formula of grouting pressure for quasi-rectangular shield is derived, which is more complex than it for circular shield.The influencing factors and corresponding reasons of grout pressure distribution in the special-shaped space are analysed.The fluid motion law of synchronous grouting along unconventional path in shield tail void is revealed clearly.The pressure distribution patterns of grout along the circumferential and longitudinal directions are obtained.Considering that the particular geometric shape of a quasi-rectangular shield, the grout flowing law and its motion process are more complicated than those of a conventional circular shield. To interpret the grouting mechanical behavior in the special-shape shield tail void, the filling and diffusion mechanism of synchronous grouting was analysed. The grout flowing is separated into two independent motion processes, which contains a circumferential filling and a longitudinal diffusion. The theoretical model of the grout pressure spatial distribution was derived based on the principle of fluid mechanics. Then, the pressure distributions in the two directions were obtained using a case study and compared with the field measured data to verify the validation of the model. Although the overall spatial pattern of grout pressure distribution on the tunnel profile show a change trend dominated by the self-weight effect mostly, its local fluctuation characteristics is very abnormal relative to that of a circular shield tunnel. Moreover, the important factors in the model were analysed, including the grout material parameters, the grouting construction parameters, and some geometry parameters. The results show that the pressure loss along this way is positively correlated with the grout flow velocity and is sensitive to the shear yield stress of the grout. The pressure loss along the circumferential direction is the most sensitive to the thickness of the ring cake, and the value range suitable for the model should be 0.02–0.03 m. The pressure loss along the longitudinal diffusion direction is the most sensitive to the size of the tail void. The research results can provide a theoretical basis for the control of special-shape shield construction.

engineering, civil