Abstract:The structural damage in the main shaft threatens the service safety of the wind turbine directly. The mechanical properties of the in-service main shaft tend to degrade severely due to the transverse cracks extending from the outer circumference. In the health monitoring of the shaft, it is of great importance not only to identify the cracks, but also to accurately evaluate the crack size. In this research, a novel quantitative method is proposed for the transverse crack characterization. The diffracted waves from the crack tip received in the central hole of the shaft are used to construct elliptic trajectories of beam path. The crack position and its depth can be determined by the intersection of the trajectories. Furthermore, a crack size quantification model is established, and the numerical demonstration is given for evaluation of crack position and depth. Meanwhile, an acoustic finite element model is developed, in which the path of the acoustic waves radiated from the end face of the shaft is analyzed in detail. The quantitative method is well confirmed by the simulation of cracks at different locations with different depths. Considering the accuracy of crack evaluation from a large size zone, the time of diffracted echo is calibrated by measuring the time shift of the transducers. A shaft sample with a transverse crack was used to implement the experimental verification. Totally, the sizing error is less than 5 mm, which indicates that this proposed method is effective for the evaluation of surface cracks in the main shaft.

Shaft crack analysis and diagnosis for the 600mw steam turbine generator

Torsional Vibration Analysis and Stress Calculation for the Fault 600MW Steam Turbine Generator Shaft System

Crack Growth Prediction Of The Steam Turbine Generator Shaft

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Study on stress and strain for fatigue cumulation evaluation in turbine generator shafts due to torsional vibration

Dynamics of Slant Cracked Rotor for a Steam Turbine Generator System

Coupled Torsional Vibration and Fatigue Damage of Turbine Generator Due to Grid Disturbance

Crack Cause Analysis of Pulverizing Wheel in Fan Mill of 600MW Steam Turbine Unit

Estimation of Fatigue Crack Growth at Transverse Vibrations of a Steam Turbine Shaft

Ultrasonic inspection of the surface crack for the main shaft of a wind turbine from the end face

Shaft Crack Identification Based on Vibration and AE Signals

Life Damage of Shaft and Spider in Hydraulic Generator Unit Based on Vibration Signal

Fatigue Failure Analysis of Shaft for NTK300 Wind Turbine

Crack investigation of martensitic stainless steel turbine blade in thermal power plant

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Method for evaluation of surface crack size of wind turbine main shaft by using ultrasonic diffracted waves

Fracture Analysis of a 135MW Steam Turbine's Last Stage Blade

Analysis and Research on Fracture Cause of Fixed Shaft of Torsion Arm of Wind Turbine Gearbox

Resultant Vibration Signal Model Based Fault Diagnosis of a Single Stage Planetary Gear Train with an Incipient Tooth Crack on the Sun Gear

Research on Vibration Fault Diagnosis Strategy for Commonly Supported Rotor of Turbogenerator

Sideband analysis of cracked planetary gear train considering output shaft radial assembly error