Abstract:In this work, a laser torsional vibrameter was used to measure the torsion vibration of a rotating shaft system under electrical network impact. Based on the principles of laser Doppler velocimetry, the laser torsional vibrometer (LTV) are non-contact measurement of torsional oscillation of rotating shafts, offering significant advantages over conventional techniques. Furthermore, a highly complex shafting system is analyzed by a modified Riccati torsional transfer matrix. The system is modeled as a chain consisting of an elastic spring with concentrated mass points, and the multi-segments lumped mass model is established for this shafting system. By the modified Riccati torsional transfer matrix method, an accumulated calculation is effectively eliminated to obtain the natural frequencies. The electrical network impacts can activize the torsional vibration of shaft system, and the activized torsion vibration frequencies contained the natural frequencies of shaft system. The torsional vibrations of the shaft system were measured under electrical network impacts in laser Doppler torsional vibrometer. By comparisons, the natural frequencies by measurement were consistent with the values by calculation. The results verify the instrument is robust, user friendly and can be calibrated in situ. The laser torsional vibrometer represents a significant step forward in rotating machinery diagnostics.

Torsional Vibration of a Shafting System under Electrical Disturbances

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Torsional vibration measurements on rotating shaft system using laser doppler vibrometer

Time-frequency Analysis on Torsional Vibration of Turbo-generator Shafts

Signal Analysis on Flexural and Torsional Vibration of Generator Shafts Impacted by Subsynchronous Resonance

Study On Torsional Vibration Of Turbine Generator Shafts Owing To Network Disturbance

STABILITY ANALYSIS OF THE SHAFT TORSIONAL OSCILLATION BASED ON LYAPUNOV DIRECT METHOD

Modeling Shaft Damping of Turbine-Generator in Electromagnetic Transient Simulation

Lyapunov stability analysis of turbine-generator including shaft system

Numerical Research on Dynamic Lateral Vibration of a Pump Turbine’s Shaft System

Analysis Of Shaft Torsional Oscillation In A Power System Using A Lure Lyapunov Function

Active control and simulation test study on torsional vibration of large turbo-generator rotor shaft

Dynamic Analysis and Study on Shaft's Torsional Vibration of Electrical Traction Shearer's Motor-Rocker and Deceleration System

Study on Torsional Vibration Response Characteristics of Marine Propulsion Shafting

Effect of Electric System Disturbances on Torsional Vibration of Turbine Generator Shaft Systems and Active Control of Torsional Vibration

Torsional Vibration Analysis and Stress Calculation for the Fault 600MW Steam Turbine Generator Shaft System

Shaft Damping Modeling for the Turbine-generator in Electromagnetic Transient Simulation

Suppressing Axial Torsion Vibrations on Turbine Shafts by Solid State Fault Current Limiter

ACTIVE CONTROL SIMULATION OF TORSIONAL VIBRATION FOR TURBINE-GENERATOR SHAFT SYSTEM BASED ON GLOBALLY OPTIMAL CONTROL ALGORITHMS OF QUADRATIC REGULATOR

Investigation of simulation experiment on active control of torsional vibration in a turbogenerator shaft system

Torsional vibration dynamics of a gear-shafting system attaching a nonlinear energy sink