Abstract:Recent development in additive manufacturing (AM) technique has led to advances in fabricating foams with desired internal structures. By using AM technique, we fabricate random foams (regularity = 0.0-0.8) and Kelvin foams (regularity = 1.0) with similar relative densities. The effects of cell regularity on the mechanical properties and deformation mechanisms of Voronoi foams are investigated experimentally and numerically. A series of quasi-static and dynamic compressive tests are performed and the strain distributions are obtained by the digital imaging correlation method. Experimental results indicate that random foams have lower collapse stresses and plateau stresses than Kelvin foams. It is due to that random foams show random localized deformations and cell-wall tearing failures while Kelvin foams exhibit layered deformation bands and no tearing failure. To decouple the two deformation and failure mechanisms affecting the Voronoi-foam mechanical properties, further numerical investigations without introducing tearing failure are carried out and random foams are found to have lower collapse stresses but similar plateau stresses with Kelvin foams. Therefore, it can be concluded that random foams have randomly-distributed localized deformations and thus can always mitigate the collapse stress, but may lower the plateau stress compared with Kelvin foams because of their cell-wall tearing failures. In addition, the cell regularity (0.0-0.8) has no significant influence on the mechanical properties of foams based on all experimental and numerical data.

Influence of Cell Strut Shape on the Mechanical Properties of Voronoi Open-Cell Foams

Effect of random cell wall thickness on the elastic properties of Voronoi foam with closed-cells

Numerical Modeling of the Compression Process of Elastic Open-cell Foams

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Investigation into elastic properties of anisotropic random foam model

Study of Cell Irregularity Effects on the Compression of Closed-Cell Foams

Effects of Statistics of Cell’s Size and Shape Irregularity on Mechanical Properties of 2D and 3D Voronoi Foams

Dynamic Crushing Behavior of 3d Closed-Cell Foams Based on Voronoi Random Model

Effects of Microstructure on Uniaxial Strength Asymmetry of Open-Cell Foams

Theoretical analysis and numerical simulation to curved strut effects on the mechanical properties of open-cell aluminum foams

Effect of Cell Structure on the Uniaxial Compression Properties of Closed-Cell Foam Materials

A note on the modelling of foams using Voronoi technique

Computational Modeling Of The Elastic Property Of Three-Dimensional Open Cell Foams

Investigation on elastic properties of closed-cell Voronoi foam

Analysis and simulation of high strain compression of anisotropic open-cell elastic foams

Quasi-Static and Dynamic Compressive Behaviors of Closed-Cell Stochastic Foams Based on Voronoi Model

Effect of cell structure on elastoplastic behavior of closed-cell foam material

Investigation into Elastic Properties of Closed-Cell Voronoi Foam

The Cell Regularity Effects on the Compressive Responses of Additively Manufactured Voronoi Foams

Calculation of the Elastic Modulus of Low Density Open-Cell Foams with Random Model

NUMERICAL ANALYSIS OF THE CREEP AND STRESS RELAXATION OF LOW DENSITY OPEN-CELL FOAMS