Abstract:This paper reports the fabrication of parallel integrated sapphire fiber Bragg gratings (SFBGs) probe sensor by the femtosecond laser point by point (PbP) method. The SFBGs probe sensor transmits optical signals through quartz multimode fiber, and takes an 8.5 mm sapphire fiber as the sensing probe, which can work stably for a long time at 1200 °C. This method can not only quickly prepare and obtain SFBGs with small bandwidth, but also obtain gratings with high reflectivity, which is about 15%. The mode field distribution in sapphire fibers with different lengths is studied by the beam quality analyzer. High-order modes are easily excited as the length of sapphire fibers increases. In addition, a spherical lens is prepared at the end of sapphire fiber, which effectively improve the signal-to-noise ratio (SNR) to 22 dB. The good spectral quality can still be maintained after holding at 1200 °C for 24 hours, and the temperature sensitivity can reach 30.19 pm/°C in the high temperature range, which is more than 2 times higher than that of quartz FBGs sensors. This parallel integrated SFBGs probe sensor overcomes the problems of doped quartz fiber element diffusion at high temperature and the instability of microstructure caused by material softening, and can be developed for long-term stable operation at 1200 °C high temperature and harsh environments.

High Temperature Resistant Fiber Bragg Grating Lasers for Sensing Applications

High-temperature-resistant distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber

Ultra-high-temperature Resistant Distributed Bragg Reflector Fiber Laser Based on Type II-IR Fiber Bragg Gratings.

Short Cavity Single Frequency Fiber Laser for In-Situ Sensing Applications over A Wide Temperature Range

High temperature resistant ultra-short DBR Yb-doped fiber laser

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

Type IIa Bragg grating based ultra-short DBR fiber laser with high temperature resistance

Fiber laser based on a fiber Bragg grating and its application in high-temperature sensing

Ultra-short DBR Fiber Laser with High-Temperature Resistance Using Tilted Fiber Bragg Grating Output Coupler.

SLM Fiber Laser Stabilized at High Temperature

Bragg grating tuned fiber laser system for measurement of wider range temperature and strain

High-temperature linearly polarized single-frequency fiber lasers based on non-PMFBGs preparation through femtosecond laser

High-temperature Linearly Polarized Single-Frequency Fiber Lasers Based on a Non-Polarization-maintaining FBG Preparation Through a Femtosecond Laser

Wide Range of Temperature and Strain Measurement Using Bragg Grating Based Fibre Laser Approach

Femtosecond Laser Inscribed Sapphire Fiber Bragg Grating for High Temperature and Strain Sensing

Parallel-Integrated Sapphire Fiber Bragg Gratings Probe Sensor for High Temperature Sensing

Inscription and characterization of Bragg gratings in single-crystal sapphire optical fibres for high-temperature sensor applications

Femtosecond Laser-Inscribed High-Order Bragg Gratings in Large-Diameter Sapphire Fibers for High-Temperature and Strain Sensing

Single-mode Optical Fibre Thermocoupler Based on Regenerated Fibre Bragg Gratings Evaluated at ~1500 °C

Single-mode helical sapphire fiber Bragg grating for high-temperature sensing

Remote high temperature sensing with a reflective bandpass long-period fiber grating and a fiber ring laser