Abstract:The sapphire fiber Bragg grating (SFBG) is a promising high-temperature sensor for application in aviation and power industries; however, the multimode characteristics of SFBG result in a broadband reflection envelope, including multiple peaks, which have a strong impact on the sensing accuracy. In this article, we propose and experimentally demonstrate a cross correlation algorithm (CCA) for the demodulation of SFBG, with the benefit of enhancing the stability of wavelength detection, and hence, the sensing accuracy can be improved. The SFBG high-temperature sensor was created by using the femtosecond laser line-by-line method and sealed in an argon gas-infiltrated sapphire tube. Such a device was demodulated by using the CCA, and the findings show that the Bragg wavelength dispersion of ±12 pm could be obtained; furthermore, before the calibration process, the SFBG sensor was annealed at 1500 °C for 50 h to enhance the stability of reflection spectrum. The temperature calibration experiment has been carried out. In that case, a dry-block calibrator with high stability was employed to calibrate the temperature uncertainty of SFBG is ±0.7 °C. Compared to the calibrated thermometer, the maximum difference is less than 2 °C. In that case, a tube furnace was used to test the SFBG; the temperature uncertainty increased to 2.2 °C, and the maximum difference increased to 7 °C. This is due to the larger temperature fluctuation of this tube furnace. A 1000-h (i.e., 42 days), 1500 °C stability test was carried out. The SFBG exhibited excellent long-term high thermal stability (temperature deviation less than 2.0 °C). A cycling temperatures test was performed, which exhibited good repeatability in temperature measurements. Hence, such an SFBG sensor and the demodulation algorithm are prospectives for applications in harsh environments.

Fiber laser based on a fiber Bragg grating and its application in high-temperature sensing

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Parallel-Integrated Sapphire Fiber Bragg Gratings Probe Sensor for High Temperature Sensing

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Remote high temperature sensing with a reflective bandpass long-period fiber grating and a fiber ring laser

Femtosecond Laser Inscribed Sapphire Fiber Bragg Grating for High Temperature and Strain Sensing

Fabrication of High-Temperature Tilted Fiber Bragg Gratings Using a Femtosecond Laser.

Short Cavity Single Frequency Fiber Laser for In-Situ Sensing Applications over A Wide Temperature Range

SLM Fiber Laser Stabilized at High Temperature

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

A Compact First-Order Bragg Grating in a Tapered Fiber Probe for High Temperature Sensing

Resonant fiber-optic thermometry with high resolution and wide range

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Femtosecond Laser Inscribed Multiple In-Fiber Reflection Mirrors for High-Temperature Sensing

Sapphire Fiber Bragg Gratings Demodulated With Cross Correlation Algorithm for Long-Term High-Temperature Measurement

Ultra-high-temperature Sensing Using Fiber Grating Sensor and Demodulation Method Based on Support Vector Regression Optimized by a Genetic Algorithm.

1100 Degrees C Fiber-Optic High-Temperature Fabry-Perot Sensors Fabricated By Laser-Micromachining

Temperature And Strain Dual-Parameter Heterogeneous Fiber Bragg Grating Sensor Made By Femtosecond Laser

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain