Abstract:Fiber Bragg grating (FBG) has been widely used in many fields for the measurement of temperature, strain, and other parameters, but single-mode FBG has a cross-sensitivity problem between temperature and strain. In this article, a new scheme is proposed to solve the problem by using parallel core–cladding FBGs, whose grating areas are located at the interface region of the core and cladding of the fiber. The sensing principle of parallel core–cladding FBGs for the simultaneous measurement of temperature and strain is theoretically analyzed. The femtosecond laser point-by-point method of the parallel core–cladding FBGs is experimentally investigated. Two parallel FBGs, namely, core FBG and cladding FBG, are formed efficiently and conveniently by a single time inscription. Two transmission peaks have been observed, which are excited by the core mode and the cladding mode. The experiment results demonstrated that the proposed compact sensor can detect the temperature with sensitivity of 11.043 pm/°C and strain with sensitivity of 1.2101 pm/ up to , and the relative errors of temperature and strain are less than 5.8% and 8.3%, respectively. The proposed parallel core–cladding FBGs are much more compact as one FBG element compared with the conventional structure with two cascaded FBGs or parallel FBGs. The parallel core–cladding FBGs can overcome the cross-sensitivity problem of single-mode FBG, which has great application value and potential in fiber sensing fields for dual-parameter.

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Simultaneous Strain and Temperature Measurement Using Compact Core-Offset Inter-Modal Interferometer with Embedded Fiber Bragg Grating

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

In-Fiber Mach-Zehnder Interferometer Exploiting a Micro-Cavity For Strain and Temperature Simultaneous Measurement

Quasi-Distributed Temperature and Strain Sensors Based on Series-Integrated Fiber Bragg Gratings

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Fiber-Optic Hybrid-Structured Fabry–Perot Interferometer Based on Large Lateral Offset Splicing for Simultaneous Measurement of Strain and Temperature