Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

High-temperature Linearly Polarized Single-Frequency Fiber Lasers Based on a Non-Polarization-maintaining FBG Preparation Through a Femtosecond Laser

High-temperature linearly polarized single-frequency fiber lasers based on non-PMFBGs preparation through femtosecond laser

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Ultra-short DBR Fiber Laser with High-Temperature Resistance Using Tilted Fiber Bragg Grating Output Coupler.

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Efficient 16 Μm Linearly-Polarized Single-Frequency Phosphate Glass Fiber Laser

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Fabrication of Integrated Single Frequency DBR Fiber Laser Directly on YDF by Femtosecond Laser

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

Ultra-high-temperature Resistant Distributed Bragg Reflector Fiber Laser Based on Type II-IR Fiber Bragg Gratings.

Stable High Power Narrow Linewidth Single Frequency Fiber Laser Using a FBG F-P Etalon and a Fiber Saturable Absorber

Distributed Bragg Reflector Fiber Lasers for High Temperature Sensor Applications

High-temperature-resistant distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber

High Temperature Resistant Fiber Bragg Grating Lasers for Sensing Applications

Switchable Multiwavelength Erbium-Doped Fiber Laser Incorporating A Sampled Fiber Bragg Grating Written In Polarization-Maintaining Fiber - Art. No. 67812w

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Low-threshold 1150 Nm Single-Polarization Single-Frequency Yb-doped DFB Fiber Laser

Efficient 1.6 μm linearly-polarized single-frequency phosphate glass fiber laser

A Single-Frequency Narrow-Linewidth Fiber Laser with PM Fiber Saturable Absorber

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm