Abstract:Ocean temperature monitoring is of great significance to marine fishing, aquaculture, and marine operations. Traditional electric sensors lack the potential to multiplex several sensors, and may suffer from electromagnetic interference. Meanwhile, fiber Bragg grating-based sensors have the advantages of high sensitivity, possibility for large-scale multiplexing, and immunity to electromagnetic interference. In this paper, we propose a Fabry–Pérot (FP) interferometer based on the draw tower grating array and combine it with the phase measurement method for demonstration and testing. In the sensor system, two adjacent fiber Bragg gratings (FBGs) are used as mirrors and an optical fiber connects them, forming a sensor unit. The signal was detected through the compensation of the optical path difference via two-arm path differences in an unbalanced interferometer. The sensor is calibrated in the range of 36.00–36.50 °C, and back to 36.00 °C, in steps of 0.10 °C. A thermocouple (DW1222) is used as a reference. Experimental testing demonstrates that under the thermal loop, the temperature and phase can be approximated as a linear relationship, the Pearson square correlation coefficient is 0.9996, and the temperature sensitivity is −9846 rad/°C. To prove that our experimental device can achieve a higher temperature resolution, we measured the background noise of the system. The experimental results indicate that the order of magnitude of our system temperature resolution can reach 10−5 °C. Thus, we believe that the sensor system is promising for the application of ocean temperature detection, and owing to the ultraweak reflection characteristics of the FBG, this method provides the possibility for large-scale multiplexing of the system.

Single-mode Optical Fibre Thermocoupler Based on Regenerated Fibre Bragg Gratings Evaluated at ~1500 °C

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Accurate high-temperature profile sensing with dense multipoint arrays of regenerated fiber Bragg gratings

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

A Compact First-Order Bragg Grating in a Tapered Fiber Probe for High Temperature Sensing

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

1200°C high-temperature distributed optical fiber sensing using Brillouin optical time domain analysis

Temperature Stability of High Ge-doped Fibre Bragg Grating

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

FBGs in Bi-Ge Co-doped Photosensitive Fibre for High Temperature Measurement Up to 1000ºc

Transition from purely elastic to viscoelastic behavior of silica optical fibers at high temperatures characterized using regenerated Bragg gratings.

High-precision optical fiber sensing beyond 1000°C

High-Temperature Sensing Based on GAWBS In Silica Single-Mode Fiber

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

A study of two optical fibre probe designs for use in high-temperature combustion gases

Inscription and characterization of Bragg gratings in single-crystal sapphire optical fibres for high-temperature sensor applications

Hollow Core Bragg Fiber Integrated With Regenerate Fiber Bragg Grating for Simultaneous High Temperature and gas Pressure Sensing

Ultrafast Annealing Improves SNR and Long-Term Stability of a Highly Multiplexed Line-by-Line FBG Array Inscribed by Femtosecond Laser in a Coreless Fiber for Extreme-Temperature Applications

Fiber Bragg Grating Based Thermometry

High-Resolution Optical Fiber Temperature Sensor Based on Draw Tower Grating Array