Abstract:The sapphire fiber Bragg grating (SFBG) is a promising high-temperature sensor for application in aviation and power industries; however, the multimode characteristics of SFBG result in a broadband reflection envelope, including multiple peaks, which have a strong impact on the sensing accuracy. In this article, we propose and experimentally demonstrate a cross correlation algorithm (CCA) for the demodulation of SFBG, with the benefit of enhancing the stability of wavelength detection, and hence, the sensing accuracy can be improved. The SFBG high-temperature sensor was created by using the femtosecond laser line-by-line method and sealed in an argon gas-infiltrated sapphire tube. Such a device was demodulated by using the CCA, and the findings show that the Bragg wavelength dispersion of ±12 pm could be obtained; furthermore, before the calibration process, the SFBG sensor was annealed at 1500 °C for 50 h to enhance the stability of reflection spectrum. The temperature calibration experiment has been carried out. In that case, a dry-block calibrator with high stability was employed to calibrate the temperature uncertainty of SFBG is ±0.7 °C. Compared to the calibrated thermometer, the maximum difference is less than 2 °C. In that case, a tube furnace was used to test the SFBG; the temperature uncertainty increased to 2.2 °C, and the maximum difference increased to 7 °C. This is due to the larger temperature fluctuation of this tube furnace. A 1000-h (i.e., 42 days), 1500 °C stability test was carried out. The SFBG exhibited excellent long-term high thermal stability (temperature deviation less than 2.0 °C). A cycling temperatures test was performed, which exhibited good repeatability in temperature measurements. Hence, such an SFBG sensor and the demodulation algorithm are prospectives for applications in harsh environments.

FBGs in Bi-Ge Co-doped Photosensitive Fibre for High Temperature Measurement Up to 1000ºc

Temperature Stability of High Ge-doped Fibre Bragg Grating

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Photosensitive indium-doped germano-silica fiber for strong FBGs with high temperature sustainability

High-temperature sustainability of strong fiber Bragg gratings written into Sb-Ge-codoped photosensitive fiber: decay mechanisms involved during annealing.

Thermal decay characteristics of strong fiber Bragg gratings showing high-temperature sustainability

Parallel-Integrated Sapphire Fiber Bragg Gratings Probe Sensor for High Temperature Sensing

Highly Photosensitive Sb/Er/Ge-codoped Silica Fiber for Writing Fiber Bragg Gratings with Strong High-Temperature Sustainability.

Fiber Bragg Grating Wavelength Drift in Long-Term High Temperature Annealing

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

High-Temperature Sensing Based on GAWBS In Silica Single-Mode Fiber

Fiber Bragg Grating Based Thermometry

Study on the doped crystal fiber high-temperature sensor

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Study on the Doped Crystal Fiber High Temperature Sensor

Single-mode Optical Fibre Thermocoupler Based on Regenerated Fibre Bragg Gratings Evaluated at ~1500 °C

Stabilized Ultra-High-Temperature Sensors Based on Inert Gas-Sealed Sapphire Fiber Bragg Gratings

A Compact First-Order Bragg Grating in a Tapered Fiber Probe for High Temperature Sensing

Sapphire Fiber Bragg Gratings Demodulated With Cross Correlation Algorithm for Long-Term High-Temperature Measurement

1200°C high-temperature distributed optical fiber sensing using Brillouin optical time domain analysis

Ultrafast Annealing Improves SNR and Long-Term Stability of a Highly Multiplexed Line-by-Line FBG Array Inscribed by Femtosecond Laser in a Coreless Fiber for Extreme-Temperature Applications