Abstract:The propulsion research lab at Utah State University has developed a minimally-intrusive optical sensing system for high-temperature/high-velocity gas-generator exhaust plumes. For this application glass fiber-optic cables, acting as radiation conduits, are inserted through the combustion chamber or nozzle wall and look directly into the flow core. The cable transmits data from the flame zone to externally-mounted spectrometers. In order to capture the full-optical spectrum, a blended dual-spectrum system was employed, with one spectrometer system tuned for best-response across the visible-light and near-infrared spectrum, and one spectrometer tuned for best-response in the near- and mid-infrared spectrum. The dual-band sensors are radiometrically-calibrated and the sensed-spectra are spliced together using an optimal Wiener filtering algorithm to perform the deconvolution. The merged spectrum is subsequently curve-fit to Planck's black-body radiation law, and flame temperature is calculated from associated curve maxima (Wien's law). The presented fiber-optic sensing systems performs a function that is analogous to Raman spectroscopy. The system non-contact, high-temperature measurement, and does not interfere with the heat transfer processes. In this report data collected from a lab-scale (200 N) hybrid rocket system are analyzed using the described method. Optically-sensed flame-temperatures are correlated to analytical predictions, and shown to generally agree within a few degrees. Additionally, local maxima in the optical spectra are shown to correspond to emission frequencies of atomic and molecular oxygen, water vapor, and molecular nitrogen; all species known to exist in the hybrid combustion plume. Presented data demonstrate that selected fiber-optics can survive temperature greater than 3000 °C, for durations of up to 25 seconds.

A study of two optical fibre probe designs for use in high-temperature combustion gases

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Multi-Doped Zirconia Ceramic Probe for Fiber-Optic Contact Measurement of Ultra-High Temperatures in Oxidative Atmosphere

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

An Improved Y2o3-Zro2 Waveguide-Fiber-Optic Sensor For Measuring Gas Flow Temperature Above 2000 Degrees C

An improved Y2O3-ZrO2 waveguide-fiber-optic sensor for measuring gas flow temperature above 2000°C

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Comparative Experimental Study of a High-Temperature Raman-Based Distributed Optical Fiber Sensor with Different Special Fibers

&Lt;title>improved Y<formula><inf><roman>2</roman></inf></formula>O<formula><inf><roman>3</roman></inf></formula>-ZrO<formula><inf><roman>2</roman></inf></formula> Waveguide Fiber Optic Sensor for Measuring Gas-Flow Temperature above 2000 Degrees Celsius</title>

Sapphire Optic Fiber Thermometer for High Temperature in Tundish

High pressure optical combustion probe

Minimally-intrusive, dual-band, fiber-optic sensing system for high-enthalpy exhaust plumes

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

Single-mode Optical Fibre Thermocoupler Based on Regenerated Fibre Bragg Gratings Evaluated at ~1500 °C

Combustor Wall Surface Temperature and Heat Flux Measurement Using a Fiber-Coupled Long Wave Infrared Hyperspectral Sensor

Design and Optimization of a High Temperature Water Cooled Probe for Gas Analysis Measurement on K11 Combustion Test Rig

In Situ High-Temperature Raman Spectroscopy via a Remote Fiber-Optic Raman Probe

Evaluation of Fiber Optic Raman Scattering Distributed Temperature Sensor Between –196 and 400 °C

Fiber-coupled LWIR hyperspectral sensor suite for non-contact component surface temperature measurements.

Construction of a High-Temperature Sensor for Industry Based on Optical Fibers and Ruby Crystal