Abstract:The reliability of computational fluid dynamics (CFD) codes is checked by comparing simulations with experimental data. A typical data set consists chiefly of velocity and temperature readings, both ideally having high spatial and temporal resolution to facilitate rigorous code validation. While high resolution velocity data is readily obtained through optical measurement techniques such as particle image velocimetry, it has proven difficult to obtain temperature data with similar resolution. Traditional sensors such as thermocouples cannot fill this role, but the recent development of distributed sensing based on Rayleigh scattering and swept-wave interferometry offers resolution suitable for CFD code validation work. Thousands of temperature measurements can be generated along a single thin optical fiber at hundreds of Hertz. Sensors function over large temperature ranges and within opaque fluids where optical techniques are unsuitable. But this type of sensor is sensitive to strain and humidity as well as temperature and so accuracy is affected by handling, vibration, and shifts in relative humidity. Such behavior is quite unlike traditional sensors and so unconventional installation and operating procedures are necessary to ensure accurate measurements. This paper demonstrates implementation of a Rayleigh scattering-type distributed temperature sensor in a thermal mixing experiment involving two air jets at 25 and 45 °C. We present criteria to guide selection of optical fiber for the sensor and describe installation setup for a jet mixing experiment. We illustrate sensor baselining, which links readings to an absolute temperature standard, and discuss practical issues such as errors due to flow-induced vibration. This material can aid those interested in temperature measurements having high data density and bandwidth for fluid dynamics experiments and similar applications. We highlight pitfalls specific to these sensors for consideration in experiment design and operation.

Evaluation of Fiber Optic Raman Scattering Distributed Temperature Sensor Between –196 and 400 °C

Comparative Experimental Study of a High-Temperature Raman-Based Distributed Optical Fiber Sensor with Different Special Fibers

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Distributed fiber-optic temperature sensor based on Raman scattering of data fiber

Temperature Performance of Raman Scattering in a Data Fiber and Its Application in a Distributed Temperature Fiber Optic Sensor

Performance evaluation of Raman scattering-based distributed optical fiber temperature sensing system in cryogenic environment

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping

Distributed optical fiber temperature measurement system based on Raman scattering applied to building fire monitor

A Spatially Distributed Fiber-Optic Temperature Sensor for Applications in the Steel Industry

Design of Distributed Raman Temperature Sensing System Based on Single-Mode Optical Fiber

TEMPERATURE FIBER-OPTIC POINT SENSORS: COMMERCIAL TECHNOLOGIES AND INDUSTRIAL APPLICATIONS

Distributed Temperature Sensing Based on Rayleigh Scattering in Irradiated Optical Fiber

Design and Implementation of Distributed Ultra-High Temperature Sensing System with a Single Crystal Fiber

Ordinary Optical Fiber Sensor for Ultra-High Temperature Measurement Based on Infrared Radiation

Electromagnetic Modelling of Fiber Sensors for Low-Cost and High Sensitivity Temperature Monitoring

Comparative Experiment Study of Distributed Optical Fiber Temperature Monitoring Methods

Optical Fiber-folded Distributed Temperature Sensor Based on Raman Scattering

Raman Distributed Temperature Optical Fiber Sensor Based on Few Mode Fibers

Design of Distributed Optical Fiber Temperature Sensing System Based on Spontaneous Raman Scattering