Abstract:The aim of this study is to improve aeroengine multistage rotor performance and to reduce the incidence of failures. Measuring the form error of seam allowance connecting cylindrical surface accurately is critical to achieve rotor optimal stack assembly stage-by-stage. In this paper, compared to the traditional cylindrical profile measurement model, a more comprehensive measurement model was built based on a 2-dimensional line laser sensor measurement technique, a model in which the component eccentricity error e, the sensor lateral offset error d, the sensor forward tilt error θx, the sensor lateral tilt error θy, and the rotary table tilt error γ were gradually modeled and separated. The particle swarm optimization algorithm was adopted to solve the model error parameters. The residual error simulation was performed to observe the effect of different levels of offset errors on the measurement results. The aeroengine rotor seam allowance surface measurement experiment was performed to verify the validity of the method model. We can conclude that the sensor lateral offset error d was 3.214 µm, sensor forward tilt error θx was 12.754′′, sensor lateral tilt error θy was 10.365 in., and rotary table tilt error γ was 2.146 in. The cylindricity error value was 3.701 µm. Compared with the traditional cylindrical profile measurement method, the measurement accuracy of cylindricity error was improved by 1.768 µm. The proposed method can improve the measurement accuracy significantly of multistage rotors in the aeroengine measurement process; besides, it can also be extended to the measurement of other geometric form errors.

Error Analysis And Compensation Of Single-Beam Laser Triangulation Measurement

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Study on the Analysis for Error in Triangular Laser Measurement and the Method of Improving Accuracy

Error Correction Of Laser Scanning System For Reverse Engineering

Error analysis and compensation of compound measuring system for blade surface

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

A Quality Improvement Method for Complex Component Fine Manufacturing Based on Terminal Laser Beam Deflection Compensation

Error Analysis of Normal Surface Measurements Based on Multiple Laser Displacement Sensors

Position-independent Thermal Error Compensation and Evaluation Based on Linear Correlation Filtering Technology

Integrated Profile and Thickness Error Compensation for Curved Part Based on On-Machine Measurement

Research progress of laser triangulation on-machine measurement technology for complex surface: A review

Laser Displacement Sensor in the Application of Aero-Engine Blade Measurement

Error identification and compensation for a laser displacement sensor based on on-machine measurement

Error Analysis and Compensation of Linear Structured Light Scanning Probes

A systematic error modeling and separation method for the special cylindrical profile measurement based on 2-dimension laser displacement sensor

A New Error Compensation Strategy on Laser Displacement Sensor in Free-Form Surface Measurement

Nonlinear Analysis and Dynamic Compensation of Stylus Scanning Measurement with Wide Range

Error-controlled adaptive machining of aeronautical cabin structures by laser triangulation on-machine measurement

Analysis of Aero-engine Blade Surface Laser Point Cloud 3D Reconstruction Error

Research of error due to measured surface configuration in the laser displacement measurement