Abstract:The current method of dynamic rail profile measurement involves the installation of a line-structured light sensor at the base of the train. The accuracy of this measurement is influenced by the vertical relationship between the laser plane of the light sensor and the longitudinal direction of the rail (LDR). When a train travels in a straight line, the normal of the laser plane aligns with the LDR. However, when the train curves, the angle at which its wheels connect with the rails causes the laser plane's normal direction to deviate from the LDR, leading to measurement errors. To address this issue, we propose a method for curved rail profile measurement using a dual-beam laser to correct these errors. This method involves generating an auxiliary 3D rail reflecting the LDR and a virtual 3D rail reflecting the normal direction of the laser plane from the cross-section image of the dual-beam laser. An optimization function is then formulated to determine the optimal auxiliary plane (optimal-AP) by analyzing the alignment or intersection between the auxiliary and virtual 3D rails. Distorted contour points are projected onto the optimal-AP to rectify errors. Experiments validate the accuracy and effectiveness of this proposed method. The results show that, regardless of pitch or yaw movement between the laser plane and the LDR, the error in measuring corrected profile wear remains consistently below 0.10 millimeters, thereby meeting the accuracy standard for rail wear measurement. This approach rectifies measurement errors in curved rail profiles from a 3D perspective, ensuring accurate measurements even under complex working conditions. It also provides a valuable reference for error analysis and improving dynamic rail profile measurement accuracy.

Profile Extraction of Structural Light Image and Its Correction Based on Light Intensity

Line Structured Light Calibration System Based on Planar Complementary Target

Study on the Analysis for Error in Triangular Laser Measurement and the Method of Improving Accuracy

Novel Enhancing Resolution Method for Measurement Straightness Error

Vision-Based Position Deviation Measurement of Rail Corrugation Chord Measuring Points under Bi-Linear Laser Assistance

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

Error Correction Of Laser Scanning System For Reverse Engineering

Nonlinear Effect of the Structured Light Profilometry in the Phase-Shifting Method and Error Correction

Real-time Motion-Induced Error Reduction for Phase-Shifting Profilometry with Projection Points Tracking Method

Improved Dual-Frequency On-Line Phase Measuring Profilometry Based On Full-Cycle Equal Phase-Shift Algorithm

Point Cloud Intensity Correction for 2D LiDAR Mobile Laser Scanning

A simple calibration method for structured light-based 3D profile measurement

Extraction Method of Line Stripes Center in the Case 3D Vision Measuring System of Structured Light

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Error correction method based on dual-beam laser for curved rail profile measurement

A Modified Multi-Exposure Fusion Method for Laser Measurement of Specular Surfaces

Depth Measurement Error Analysis and Structural Parameter Correction of Structured Light Depth Imager

A Planar-Pattern-based Calibration Method for High-Precision Structured Laser Triangulation Measurement

Calibration Method for Line-Structured Light Three-Dimensional Measurement Based on a Simple Target

Robust laser stripe extraction for 3D measurement of complex objects

Study on the Error of the Three-Dimensional Structure Light Measurement Based on Triangulation Principle