Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. For the analysis of gas pulsation characteristics in the pipeline systems of low density polyethylene (LDPE) hyper compressors, a time-domain calculation method for compressor pipeline gas pulsation based on real gas properties is proposed. First the thermophysical property tables are prepared with gas state parameters as independent and dependent variables. Then one-dimensional unsteady flow equations and characteristic equations for pipeline flow are established based on real gas properties. After setting pipeline parameters and boundary conditions, the flow equations are discretized using a two-step method at the inner points of the pipeline. The characteristic equations are discretized using the trapezoidal integration method at the boundary points. Thus, the time-domain solving of pulsating flow field in the pipeline is realized. A self-developed numerical code was used to conduct the time-domain calculation and analysis of gas pulsation in the discharge pipeline of a two-stage hyper compressor. The calculated pressure pulsation curves based on real gas properties are in good agreement with experimental data, with a maximum difference lower than 4% of the local average pressure, which is smaller than the difference between the results calculated based on the plane wave theory and the measured data. The analysis of gas pulsation characteristics shows that the pressure pulsation in the main pipeline is mainly contributed by the fundamental and second harmonics. The pressure pulsation in the safety valve branch is higher than that in the main pipeline, and the harmonic components falling into the acoustic resonance frequency range of this branch have significant amplitudes. The acoustic resonance frequency of the branch pipeline is not affected by the main pipeline. Pressure pulsation varies with changes in rotational speed and back pressure, and the pulsation level is more significantly affected by rotational speed compared to back pressure. The renovation scheme of connecting the safety valve branch and expansion tube in series can effectively reduce the pressure pulsation levels of the main pipeline and branch pipeline.

Analysis and Suppression of Gas Flow Noise from the Accumulator of Rotary Compressor

Improvement on Acoustic Performance of the Accumulator of Double-Cylinder Rotary Compressors

Amelioration of Acoustic Performance of Two-cylinder Compressors by Using Single-pipe Suction Accumulator

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Reduction of Radiated Noise from Rotary Compressors by Acoustic Interference Effects

Numerical Simulation and Structure Optimization of Compressor Muffler

Prediction and Control Research for Noise Radiation of a Rotary Compressor Accumulator

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Investigation on the Pressure Pulsation in the Discharge Muffler of Rotary Compressors

Review and outlook of study on gas flow noise of rotating compressors

Numerical analysis of aerodynamic noise in a high parameter pressure reducing valve

Simulation Research on Distribution Method of Axial Piston Pump Utilizing Pressure Equalization Mechanism

Flow-induced Noise Mechanism and Optimization Design of Electronic Expansion Valve

Study On Acoustic Performance Of A Water Muffler For Gear Pump

Numerical Simulation of Flow-Induced Noise in High Pressure Reducing Valve

Investigation of Suction Pressure Pulsation Prediction of Rotary Compressor with Total Variation Diminishing Scheme and One-Dimensional Accumulator Model

Simulation and experimental research on aerodynamic noise of gas turbine 1.5-stage axial compressor

Analyses of gas pulsation characteristics in the discharge pipeline of a hyper compressor

Vibration and pressure pulsation elimination in a reciprocating compressor suction system using an acoustic filter

Analysis of the Performance of the Compressor

Vibration Analysis and Rebuilding for Superhigh Pressure Reciprocating Compressor