Abstract:The unstable flow phenomena in compressors, such as stall and surge, are closely related to the efficiency and the operating region. It is indispensable to capture the unstable flow structure in compressors and understand the mechanism of flow instability at low flow rates. Cooperated with the manufacturer, an industrial centrifugal compressor with a vaneless diffuser is tested by its performance test rig and our multi-phase dynamic measurement system. Many dynamic pressure transducers are circumferentially mounted on the casing surface at seven radial locations, spanning the impeller region and the diffuser inlet region. The pressure fields from the design condition to surge are measured in details. Based on the multi-phase dynamic signals, the original location of stall occurring can be determined. Meanwhile, the information of the unstable flow structure is obtained, such as the circumferential mode and the propagating speed of stall cells. To get more details of the vortex structure, an unsteady simulation of this tested compressor is carried out. The computational result is well matched with the experimental result and further illustrates how the unstable flow structure in the impeller region gradually affects the stability of the total machine at low flow rates. The dynamic mode decomposition (DMD) method is applied to get the specific flow pattern corresponding to the stall frequency. Both experimental and computational analysis show that the flow structure at a particular radial location in the impeller region has a great impact on the stall and surge. Some differences between the computational and experimental result are also discussed. Through these two main analytical methods, an insight into the unstable flow structure in an industrial compressor is gained. The result also plays a crucial role in the guidance of the compressor stabilization techniques.

Analysis of the Performance of the Compressor

A Review on Theoretical and Numerical Research of Axial Compressor Surge

Experimental and Computational Analysis of the Unstable Flow Structure in a Centrifugal Compressor with a Vaneless Diffuser

Theory and analysis method based on vorticity dynamics for gas turbine compressor

Performance analysis for a rotary compressor at high speed: experimental study and mathematical modeling

Effect of Casing Suction on Stage Matching and Flow Loss in A High Pressure Axial Compressor

Mechanism Underlying the Effect of Self-Circulating Casings with Different Circumferential Coverage Ratios on the Aerodynamic Performance of a Transonic Centrifugal Compressor

Analysis of Centrifugal Compressor With Holed Casing in the Small Flow Condition

Performance Analysis of Multistage Axial Compressor at Surge Conditions

A Study of Influences of Inlet Total Pressure Distortions on Clearance Flow in an Axial Compressor

COMPUTATION AND ANALYSIS ON THE IMPELLER BACKSIDE CAVITY OF A CENTRIFUGAL COMPRESSOR

Numerical Simulation Of Surge In A Centrifugal Compressor With Different Operating Condition Using The Plenum Model

Effect of Tip Clearance on Compressor Performance

Analysis of the Thermodynamic Characteristics of a Hyper-Compressor through Numerical Simulation and Experimental Investigation

Numerical analysis of Internal Flow field on a Centrifugal Impeller Approaching to Stall

A Theoretical Study on the Novel Structure of Vane Compressor for High Efficiency

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

NUMERICAL INVESTIGATION OF A CENTRIFUGAL COMPRESSOR WITH A SINGLE CIRCUMFERENTIAL GROOVE IN DIFFERENT TYPES OF DIFFUSERS

Analysis of the Tip Clearance Flow Structure in a Centrifugal Compressor

Investigation of Flow Behaviour and Heat Rejection for an Air-Cooled Small Multi-Stage Swash-Plate Compressor

Quantitative analysis of energy loss and performance prediction of regenerative compressor