Abstract:Due to the tunable porosity at multiple scales, hierarchical porous ceramics feature large specific surface area and excellent heat and mass transfer performance, which can effectively improve the catalytic reaction performance. This paper presents a method to fabricate SiC scaffolds with regular and hierarchical pore structures by direct ink writing (DIW) combined with sacrificial template technology, which can be used as methanol steam reforming (MSR) microreactor catalyst supports. Through printing along a defined path, primary pores with a regular pore structure were created. After sintering, the sacrificial template was removed and secondary pores appeared. Four different types of hierarchical porous SiC scaffolds were successfully prepared and the pore structure, total porosity, linear shrinkage and compressive strength of these scaffolds were investigated. The catalyst coating was then loaded onto the scaffold, and the microstructure characterization showed that the pore structure would not be damaged and blocked. Finally, the hydrogen production experiments were carried out on the MSR microreactor, and the results showed that the support with larger and denser secondary pores had the best fluid flow and hydrogen production characteristics. At the temperature of 280 degrees C and the gas hourly space velocity (GHSV) of 30000 ml g-1 h-1, the methanol conversion and hydrogen production of the best support can reach 90.95 % and 44.96 ml/min, respectively.

Preparation of Porous Silicon Microreactor Components Integrated with Microheater and Noble Metal Catalyst

Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

A Well-Dispersed Catalyst on Porous Silicon Micro-Reformer for Enhancing Adhesion in the Catalyst-Coating Process

Hydrogen production in microreactor using porous SiC ceramic with a pore-in-pore hierarchical structure as catalyst support

Preparation of Hydrophobic Porous Silicon by Metal-Assisted Etching with Pd-Catalyst

Macroporous silicon templated from silicon nanocrystallite and functionalized SiH reactive group for grafting organic monolayer

Study on Fabrication and Thermal Analysis of Porous Silicon Nanoenergetic Materials

Microstructure, Heat Treatment, and Oxidation Study of Porous Silicon Formed on Moderately Doped P-Type Silicon

In Situ Synthesis Of 3d Platinum Nanoflowers On Porous Silicon For Monolithic Integrated Micro Direct Methanol Fuel Cells

Direct Imprinting of Porous Silicon Via Metal‐Assisted Chemical Etching

Preparation of Si Nanocrystals Using Anodic Porous Alumina Template Formed on Silicon Substrate

Deposition of Platinum Nanoparticles on P-Type Macroporous Silicon Wall

Preparation and in situ reduction of Ni/SiCxOy catalysts supported on porous SiC ceramic for ethanol steam reforming

Silver Nano-Dendrite-Plated Porous Silicon Substrates Formed by Single-Step Electrochemical Synthesis for Surface-Enhanced Raman Scattering

Preparation of porous silicon by vacuum sublimation dealloying method

Preparation Of Porous Silicon Using Anodizing And Suppercritical Drying

Fabrication, characterization, and application in nanoenergetic materials of uncracked nano porous silicon thick films

A Pd/Al2O3-based micro-reformer unit fully integrated in silicon technology for H-rich gas production