Abstract:Electrodeposition is an effective approach to synthesize porous electrocatalysts; however, the impact of deposition conditions on the catalyst porosity and morphology has rarely been systematically studied. More importantly, the mass transport of CO2 is poor because the electrodes are generally fully covered by aqueous electrolytes, leading to low current densities. Hydrophobic modification can generate gas-liquid-solid interfaces that facilitate CO2 mass transport. However, the conventional superficially hydrophobic modification sacrifices the activity due to partially covered active sites, has difficulty in the uniform modification of internal pore surfaces due to large polymer size, and the surface hydrophobic sites are easily washed away. Here, we report a unique hydrogen bubble dynamic template electrodeposition method to synthesize interiorly hydrophobic ZnAg foam electrodes by physically trapping polytetrafluoroethylene (PTFE) during electrodeposition. Deposition conditions were found to influence the pore diameter and morphology. The pore diameter increases with the deposition current density and duration. The pore wall structure gradually transformed from nanodendrites at -0.5 Acm(-2) into nanosheets at -1 Acm(-2) or beyond. The resulting interiorly hydrophobic ZnAg(3A15s)-40 exhibits a maximum FECO of 97.6% and a significantly widened current density window of -5 to -50 mAm(-2) with an FECO of more than 90.4% in a microchannel reactor, which is significantly higher than those of bare ZnAg(3A15s) (-5 to -30 mAcm(-2) with an FECO more than 90.0%) and the Zn rod substrate (-5 mAcm(-2) with an FECO of 64.0%). The in situ attenuated total reflection Fourier transformed infrared (ATR-FTIR) spectroscopy suggested the hydrophobic catalyst has enhanced CO2 concentration near the inner surface, which promotes the activity of CO2 reduction to CO.

A Well-Dispersed Catalyst on Porous Silicon Micro-Reformer for Enhancing Adhesion in the Catalyst-Coating Process

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

OPTIMIZATION OF Cu/ZnO/Al2O3 CATALYST COATINGS

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

Performance Enhancement on A Micro-Column Structure Reformer Via Thick-Film Photoresist Pre-Protection

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Porous reticular CuO/ZnO/CeO2/ZrO2 catalyst derived from polyacrylic acid hydrogel system on Al2O3 foam ceramic support for methanol steam reforming microreactor

Development of a centrifugal coating method to load catalyst washcoat onto porous substrates with high uniformity and adhesive strength

Development of centrifugal coating device to load CuZnZr/γ-Al 2 O 3 catalyst on porous substrates for methanol steam reforming

Development of Cylindrical Laminated Methanol Steam Reforming Microreactor with Cascading Metal Foams As Catalyst Support

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt

On-Board Production of Hydrogen for Fuel Cells over Cu/Zno/Al2o3 Catalyst Coating in A Micro-Channel Reactor

A Novel Structured PdZnAl/Cu Fiber Catalyst for Methanol Steam Reforming in Microreactor

Mass Transfer Enhancement and Drying Mechanism of High Adhesion Saturated Impregnated Co-Al2O3 Monolithic Catalyst

Interiorly Hydrophobic Modification of Electrodeposited Self-supported ZnAg Foam Electrodes for CO2 Electroreduction in a Microchannel Reactor

Porous silica supported Ag core-Pd shell composite: Seed-mediated stepwise reduction and tunable dispersion for boosting catalytic hydrogen evolution

Hydrogen production in microreactor using porous SiC ceramic with a pore-in-pore hierarchical structure as catalyst support

Hydrophobic Electrode Design for CO2 Electroreduction in a Microchannel Reactor

Development of a microchannel reactor concerning steam reforming of methanol