Abstract:Graphical The new CuO–(Y2O3)0.4(CeO2)0.2 catalyst has high specific surface area and developed pore structure and exhibits excellent low CO selectivity and high H2 selectivity in methanol steam reforming (MSR) process, which is expected to provide a reference for large‐scale industrial hydrogen production. Compared with the relatively simple monometallic and bimetallic oxide catalytic systems, polymetallic catalysts have attracted much attention in recent years. CuO–(Y2O3)(1−x)/2(CeO2)x (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) polymetallic catalyst for hydrogen production by methanol steam reforming(MSR) was prepared by sol–gel method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy, X‐ray photoelectron spectroscopy (XPS), and Specific surface area and pore size analyser(BET) techniques. XRD results show that the diffraction peaks of CuO–(Y2O3)0.4(CeO2)0.2 are sharp and intense, indicating that it is highly crystalline. SEM results show that the pore structure of catalyst becomes loose with the increase of Ce doping amount, and the catalyst particles become more uniform in size and more loose in shape. The BET results show that compared with other catalysts, CuO–(Y2O3)0.4(CeO2)0.2 catalyst has larger specific surface area, which improves the catalytic performance. XPS results showed that CuO–(Y2O3)0.4(CeO2)0.2 still had catalytic activity after reduction treatment. The results of MSR showed that the doping amount of cerium and the reaction conditions affected the catalytic performance of the catalyst. Ce doping promoted the synergistic effect of Cu and Y, and the hydrogen production of CuO–(Y2O3)0.4(CeO2)0.2 was the highest (about 6.74 × 10−3 mol/min/gcat). Ce doping leads to the change of CO/CO2 selectivity in gas products. The CO selectivity of CuO–(Y2O3)0.4(CeO2)0.2 catalyst is only 2% under the catalytic conditions of 400°C, W/M 4:1, and LHSV 20 h−1, which shows good catalytic activity.

Construction of porous Cu/CeO2 catalyst with abundant interfacial sites for effective methanol steam reforming

CuO–ZnO catalyst decorated on porous CeO2-based nanosheets in-situ grown on cordierite for methanol steam reforming

Efficient Cu/CeO2 composites for hydrogen production from photothermal methanol steam reforming: The utility of synergism of photo and thermal catalysis

Preparation of a Durable CuO/ZnO/CeO2/ZrO2 Catalyst on an SiC Support by an Inverse Microemulsion/Precipitation Method for Methanol Steam Reforming

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

Improved hydrogen production performance from methanol steam reforming by Ce‐doped CuO–Y2O3 catalysts

A Novel Synthetic Route for MOF-derived CuO-CeO2 Catalyst with Remarkable Methanol Steam Reforming Performance

Revealing the Promoting Effect of CeO2 on the Cu/ZnO Catalyst for Methanol Steam Reforming

The Cu-Al2O3 Interface: an Unignorable Active Site for Methanol Steam Reforming Hydrogen Production

Direct synthesis of CuO–ZnO–CeO2 catalyst on Al2O3/cordierite monolith for methanol steam reforming

Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming

An exsolved Cu nanocatalyst for highly efficient methanol steam reforming

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Engineering Cu plus /CeZrOx interfaces to promote CO2 hydrogenation to methanol

Electrochemical Synthesized Copper Mesh Catalysts for Methanol Steam Reforming

In-situ Self-Assembled Cu2O/ZnO Core-Shell Catalysts Synergistically Enhance the Durability of Methanol Steam Reforming

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

[Ce3+-OV-Ce4+] Located Surface-Distributed Sheet Cu-Zn-Ce Catalysts for Methanol Production by CO2 Hydrogenation

Cu0-Cu+ synergistic catalysis towards C-H bond fracture in methanol reforming with extremely-high hydrogen production

Structured nanoporous Cu/ZnO catalysts for on-board methanol steam reforming prepared by laser powder bed fusion and dealloying

A composite having a porous substrate and polyhedral Cu-Fe oxide nanoparticles showing high catalytic activity during the steam reforming of methanol at low temperatures