Abstract:The porous foam material has been attracted to be used as the catalyst coating substrate for microreactors due to its generally excellent heat and mass transfer characteristics. Preparing uniform catalyst coating onto porous foam can increase the adhesion area between the coating and substrate to reduce spallation and extend the service life of microreactors. Herein, we developed a highly automatic centrifugal coating device to fabricate relatively uniform catalyst coating onto porous foam structures. The structural and hardware components of the automatic centrifugal coating device are introduced, and an active disturbance rejection control (ADRC) algo-rithm is adopted to accurately adjust the centrifugal speed with an error of <1 % to ensure the relative uni-formity of catalyst coating. By using the developed device, the CuZnZr/gamma-Al2O3 catalyst coating can be successfully loaded onto three types of foam substrates (Cu, alpha-SiC/alpha-Al2O3, alpha-Al2O3) with high relative unifor-mity. The spallation resistance was examined by thermal shock and high-speed steam scouring tests. After that, the porous foam substrate with coated catalyst was used in microreactors for methanol steam reforming, results showed that the conversion rate of CuZnZr/gamma-Al2O3/Cu foam structured catalyst can reach 90.7 % and hydrogen flow rate is 296.18 mL/min at 300 C. This study demonstrates our developed centrifugal coating device has the potential for industrial application of structured catalyst preparation.

Development of centrifugal coating device to load CuZnZr/γ-Al 2 O 3 catalyst on porous substrates for methanol steam reforming

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Development of a centrifugal coating method to load catalyst washcoat onto porous substrates with high uniformity and adhesive strength

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Development of Cylindrical Laminated Methanol Steam Reforming Microreactor with Cascading Metal Foams As Catalyst Support

Porous reticular CuO/ZnO/CeO2/ZrO2 catalyst derived from polyacrylic acid hydrogel system on Al2O3 foam ceramic support for methanol steam reforming microreactor

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

OPTIMIZATION OF Cu/ZnO/Al2O3 CATALYST COATINGS

Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

One-step growth of CuO/ZnO/CeO2/ZrO2 nanoflowers catalyst by hydrothermal method on Al2O3 support for methanol steam reforming in a microreactor

A Well-Dispersed Catalyst on Porous Silicon Micro-Reformer for Enhancing Adhesion in the Catalyst-Coating Process

Structured nanoporous Cu/ZnO catalysts for on-board methanol steam reforming prepared by laser powder bed fusion and dealloying

A Monolith CuNiFe/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether and Applied in a Microreactor

On-Board Production of Hydrogen for Fuel Cells over Cu/Zno/Al2o3 Catalyst Coating in A Micro-Channel Reactor

Fabrication of γ-Al2O3 Nanoarrays on Aluminum Foam Assisted by Hydroxide for Monolith Catalysts

Construction of porous Cu/CeO2 catalyst with abundant interfacial sites for effective methanol steam reforming

Development of a microchannel reactor concerning steam reforming of methanol

Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation

Hydrogen production in microreactor using porous SiC ceramic with a pore-in-pore hierarchical structure as catalyst support

An Efficient Method for Enhancing Adhesion and Uniformity of Al2O3 Coatings on Nickel Micro-Foam Used in Micropacked Beds