Abstract:Microdevices prepared in a silicon substrate have been widely used in versatile fields due to the matured silicon-based microfabrication technique and the excellent physical properties of silicon material. However, the high thermal conductivity of silicon restricts its application in most thermal microdevices, especially devices comprising different temperature zones. In this work, a parylene-filled-trench technique was optimized to realize high-quality thermal isolation in silicon-based microdevices. Parylene C, a heat transfer barricading material, was deposited on parallel high-aspect-ratio trenches, which surrounded the isolated target zones. After removing the remnant silicon beneath the trenches by deep reactive ion etching from the back side, a high-quality heat transfer barrier was obtained. By using narrow trenches, only 5 mu m thick parylene was required for a complete filling, which facilitated multi-layer interconnection thereafter. The parylene filling performance inside the high-aspect-ratio trench was optimized by two approaches: multiple etch-deposition cycling and trench profile controlling. A 4 x 6 array, in which each unit was kept at a constant temperature and was well thermally isolated individually, was achieved on a silicon substrate by using the present parylene-filled-trench technique. The preliminary experimental results indicated that the present parylene-filled-trench structure exhibited excellent thermal isolation performance, with a very low power requirement of 0.134 mW (K mm(2))(-1) for heating the isolated silicon unit and a high thermal isolation efficiency of 72.5% between two adjacent units. Accompanied with high-quality isolation performance, the microdevices embedded the present parylene-filled-trench structure to retain a strong mechanical connection larger than 400 kPa between two isolated zones, which is very important for a high-reliability-required micro-electro-mechanical-system (MEMS) device. Considering its room-temperature processing essence, the present parylene-filled-trench technique is believed to be a promising isolation method in the post-complementary metal oxide semiconductor MEMS integration.

A Cmos-Compatible Silicon Substrate Optimization Technique And Its Application In Radio Frequency Crosstalk Isolation

Effective Crosstalk Isolation With Post-CMOS Selectively Grown Porous Silicon Technique for Radio Frequency System-on-Chip (SOC) Applications

Modeling and Optimization of Substrate Electromagnetic Coupling and Isolation in Modern Lightly Doped CMOS Substrate

A Shielding Structure for Crosstalk Reduction in Silicon Interposer

Crosstalk Reduction in TSV Arrays with Direct Ohmic Contact Between Metal and Silicon-Substrate

Modeling and Measurement of A Novel Shielding Design in Silicon Interposer

Frequency-Response-Oriented Design and Optimization of N+ Diffusion Guard Ring in Lightly Doped CMOS Substrate

Analysis and Suppression for Crosstalk in SiC MOSFET Turn-off Transient

Characterization of Tsv-Induced Loss and Substrate Noise Coupling in Advanced Three-Dimensional Cmos Soi Technology

Impact of Crosstalk into High Resistivity Silicon Substrate on the RF Performance of SOI MOSFET

The Investigation of the Substrates Noise Suppression Using Guard Rings in CMOS Technology

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

A 2.5D Integrated L Band Receiver Based on High Resistivity Si Interposer

High-Performance CMOS-Comp Edge-Suspended Coplanar W Resistivity Silicon

Mitigation of substrate coupling effects in RF switch by localized substrate removal using laser processing

Mitigating TSV-induced substrate noise coupling in 3-D IC using buried interface contacts

Optimization of RF Performance and Reliability of 28V RF-LDMOS

Optimizing performance for on-chip SBS-based isolator

A Parylene-Filled-Trench Technique for Thermal Isolation in Silicon-Based Microdevices

A Novel Radiation Tolerant SOI Isolation Structure