Abstract:Modified polypentafluorophenyl methacrylate with side‐groups of both POSS and alkane is prepared and blended with polypropylene through melt‐blending process. It is proved that this blend not only demonstrates durable hydrophobicity and enhanced mechanical properties due to its surface segregation, orientation, and crosslinking, but also can maintain those properties under many extreme conditions. Durable functionalization on polypropylene (PP) surfaces is always a key problem to besolved. Coatings with low surface energy peel off easily especially under extreme conditions, owing to their weak adhesion. In this paper, side groups of both polyhedral oligomeric silsesquioxane (POSS) and alkane are grafted to polypentafluorophenyl methacrylate (PFP), and then PP blends with these side‐group modified PFP are obtained through a melt‐blending process. It is found that POSS can result in surface segregation and provide hydrophobicity in blends. Microfibers are formed because of the orientation effect during the tensile testing, which furtherly promotes mechanical strength. Significantly, alkaneside‐groups can be entangled with PP segments, which brings about cross linking. Therefore, with crosslinking and synchronous orientation of POSS, the elongation at the break of blends is greatly increased up to 974%. The final blend demonstrates quite durable hydrophobicity under many extreme conditions, such as repeated tape peeling, ultrasonic washing, strong friction, and soaking in strong acid (pH = 1), strong alkali (pH = 14) and alcohol. The heat and UV resistance of the blend are also obviously improved. This study will develop anovel and facile strategy to endow PP with durable hydrophobicity as well as greatly enhanced mechanical properties.

Fast Functionalisation of Polypropylene (pp) by Ultraviolet Irradiation and Compatibilised Pp/Caco3 Composite

Effect of Light Intensity on Ultraviolet Irradiated Polypropylene and Its Compatibilization with CaCO3

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Effect of Environmental Temperature on Ultraviolet Irradiated Pp and Its Composite

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Studies on Fast Functionalization of HDPE by Ultraviolet Irradiation and Functionalized HDPE/CaCO3 Composites

Studies on Quick Functionalization of Polyethylene Through Ultraviolet Irradiation and Its Composites

Compatibilization of irradiated HDPE

STUDIES ON FUNCTIONALIZATION OF HIGH DENSITY POLYETHYLENE AND ITS COMPATIBILIZATION EFFECT

Modification Of Mechanical And Color Properties Of Polypropylene With Colored Nano-Sio2 Prepared From Diatomite

A Novel Method for Functionalization of Polypropylene with Oligomer of Glycidyl Methacrylate: Characterization of Copolymers

Studies on Linear Low-Density Polyethylene Functionalized by Ultraviolet Irradiation and Its Compatibilization

Study on Structure and Properties of HDPE Functionalized by Ultraviolet Irradiation in Air and O2 Atmosphere

Irradiation Modification of LLDPE and Its Compatibilization and Toughening Effect

A study on ultraviolet irradiation modification of high-density polyethylene and its effect in the compatibility of HDPE/PVA fibre composites

Effect of ultraviolet light irradiation intensity on chemical structure and compatibilization of HDPE to HDPE/PC blend

Studies of polypropylene modified by waste of PMMA/ABS/UPR multilayer plates

A STUDY ON ULTRAVIOLET IRRADIATION FUNCTIONALIZATION OF HDPE

A Study of Ultraviolet Irradiation Functionalization of LLDPE and Its Modification of PA66

Studies on Structure and Properties of Hdpe Functionalized Through Ultraviolet Irradiation and Its Blends with Caco3

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate