Studies on Linear Low-Density Polyethylene Functionalized by Ultraviolet Irradiation and Its Compatibilization

Wu Shi-Shan,Chen Zheng-Nian,Ma Qing-Qing,Shen Jian

DOI: https://doi.org/10.1007/s00289-006-0602-7

IF: 2.843

2006-01-01

Polymer Bulletin

Abstract:Some groups containing oxygen such as C-O, C-OH and C=O were introduced onto the molecular chains of linear low-density polyethylene (LLDPE) through ultraviolet irradiation in air. The concentration of these groups containing oxygen increased with increasing irradiation time. After irradiation, the molecular weight of the LLDPE decreased, and its distribution widened. It was found that the gelation occurred after the LLDPE was irradiated for 12 h, and the gel content increased with increasing irradiation time. The crystal shape and space of the crystalline plane for irradiated LLDPE remained. Compared with those of LLDPE, the melt flow index, tensile strength and elongation at break of the irradiated LLDPE decreased, but its hydrophilicity increased and its toughness retained good. The polyamide 66 (PA66)/LLDPE/irradiated LLDPE blends were prepared by blending a small percentage of irradiated LLDPE with PA66. The melting temperature and crystallinity of both the LLDPE and PA66 components in the blends decreased with increasing irradiation time. The compatibility, dispersion and interfacial interaction between PA66 and LLDPE were improved after blending. With the addition of 5% LLDPE irradiated for 36 h, the tensile strength, bending strength and notched impact strength of the blends was enhanced from 48.3 MPa, 64.8 MPa and 30.8 J/m to 57.4 MPa, 71.5 MPa and 101.2 J/m, respectively.