Abstract:Densified ZrB2–SiC-based ultra-high temperature ceramics reinforced with short carbon fibers were prepared by conventional hot-pressing. The microstructure, mechanical and oxidation resistance properties of the composite were investigated. The Csf/ZrB2–SiC composite had improved fracture toughness of 6.6MPam1/2 compared to ZrB2–SiC composite of 4.3MPam1/2 due to fiber debonding, fiber pull-out and fiber bridging as well as crack deflection. It was found that the low modulus of carbon fiber and a graphitization transition layer between fiber and matrix led to the decreased flexural strength. The oxidation resistance tests were carried out on Csf/ZrB2–SiC using an oxyacetylene torch. The temperature of the oxidized specimen exceeded 1800°C and the surface layer appeared dense and adherent. No macro-cracks or spallation were detected, suggesting that these composites possess a better oxidation resistance than ZrB2–SiC. The improved oxidation resistance is attributed to the formation of a coherent SiO2 rich scale, which acts as an effective barrier against the inward diffusion of oxygen. The results presented here point to a potential way for improving toughness of composite without sacrificing oxidation protection.

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Microstructure and mechanical properties of hot pressed ZrB2–SiCp–ZrO2 composites

Microstructure and mechanical properties of hot pressed ZrC-SiC-ZrB 2 composites

Microstructure and Mechanical Properties of ZrB2-SiC Composites

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Mechanical properties and thermal shock behavior of hot-pressed ZrB2–SiC–AlN composites

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Ultra-high-temperature Tensile Properties and Fracture Behavior of ZrB2-based Ceramics in Air above 1500°C

Microstructure and Mechanical Properties of Hot-Pressed ZrB2–SiC–ZrO2f Ceramics with Different Sintering Temperatures

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

High-Performance Zrb2-Sic-C-F Composite Prepared by Low-Temperature Hot Pressing Using Nanosized Zrb2 Powder

Preparation and Characterization of High-Performance ZrB 2 –sic–cf Composites Sintered at 1450 °C

Flexural Strength and Fracture Behavior of ZrB2–SiC Ultra-High Temperature Ceramic Composites at 1800°C

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Mechanical Properties and Toughening Mechanism of WC-doped ZrB2–ZrSi2 Ceramic Composites by Hot Pressing

Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites

Study on Zrc-20vol.%Sicw Ultrahigh Temperature Ceramics by Hot Pressing

Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic

Effect of high temperature heat treatment on ZrB2-SiC composites added with Yb2O3