Abstract:Magnesia nanopowder with different particle sizes (10-100 nm) and different crystallinity was synthesized by the sol -gel method from an Mg(NO3 )2·6H2O precursor. The mechanism of gel formation in the presence of citric acid, the factors that affect the stability of sol - gel, including the amount of water, ethanol and complexing reagent, and the influences of calcining temperature on the particle size and crystallinity of MgO particles were investigated. The results indicate that when citric acid is not introduced into the system, the stability of gel is poor and therefore the MgO powders obtained have a large particle size and there is serious agglomeration. Citric acid can effectively enhance the stability of gel and a stable gel is formed when the mole ratio of water, magnesium nitrate, citric acid and ethanol is 100 : 9 : 9 : 2. 1. The calcining temperature has no remarkable effect on the chemical composition and crystal shape of prepared MgO powders. However, the calcining temperature has a significant effect on the particle size and the crystallinity of MgO. When the calcining temperature is 500℃, low crystalline magnesia powder with a particle size of about 10 nm and certain agglomeration is produced, while calcining at 600℃ forms MgO powder with a particle size of 30-60 nm and with good crystallinity and uniform dispersion. MgO powder with a particle size of 50-100 nm with better crystallinity and a perfect crystal structure is obtained at 900℃.

Large-scale synthesis of magnenium silicon nitride powders at low temperature

Low‐Temperature Synthesis of Nanocrystalline Α‐si3n4 Powders by the Reaction of Mg2Si with NH4Cl

Low-Temperature Synthesis of Nanocrystalline α-Si<sub>3</sub>N<sub>4</sub>Powders by the Reaction of Mg<sub>2</sub>Si with NH<sub>4</sub>Cl

Synthesis of MgSiN2 Cuboids by a Solid-state Reaction

Combustion Synthesis of MgSiN2 Powders and Si3N4‐MgSiN2 Composite Powders: Effects of Processing Parameters

Synthesis and microwave dielectric properties of (Ca0.7Mg0.3)SiO3 nanopowder prepared at low temperature

The Role of MgSiN2 During the Sintering Process of Silicon Nitride Ceramic

Solvothermal Synthesis of Si3n4 Nanomaterials at A Low Temperature

SYNTHESIS OF NANOMETER MAGNESIA BY SOL- GEL METHOD

Preparation of silicon nitride powder from silica and ammonia

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Sulfur-assisted Fabrication of Silicon Nitride Nanorods in Autoclaves at 250 °C

Additive-Assisted Nitridation to Synthesize Si<sub>3</sub>N<sub>4</sub>Nanomaterials at a Low Temperature

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Additive‐Assisted Nitridation to Synthesize Si3N4 Nanomaterials at a Low Temperature

Phase-controlled Synthesis of Nickel Silicide Nanostructures

Synthesis of High Surface Area Nanometer Magnesia by Solid-State Chemical Reaction

Magnesium Nitrate As Additive for Synthesis of Mg(OH)2 Nanoparticles

Mg-catalyzed autoclave synthesis of aligned silicon carbide nanostructures.

Low Temperature Solid-State Synthesis of Nanocrystalline Gallium Nitride

The influence of magnesium compounds on the properties of silicon nitride ceramics