Abstract:The topicality of this work is due to the necessity of developing environmetally safe, highly efficient, and economical complex vacuum distillation technology for processing lead-containing middlings and wastes, in particular, the alloy fabricated when recovering the silicate slag of smelting copper-electrolyte slime (SPA) with the purpose of fabricating commerical monoelement concentrates of antimony, lead, and silver. Laboratory investigations into processing the SPA alloy and caclualtoins of "temperature–composition" ( T–x ) equlibrium phase diagrams (vapor-liquid equilibrium (VLE)) for analyzing the behavior of Sb–Pb and Pb–Ag binary alloys during processing; the preliminary selection of temperature and pressure in the system; and the separation efficiency of components under conditions of T = 900–2100 K, P = 1–133 Pa, and τ = 8–16 h are performed. The influence of temperature and pressure in the system; sublimation duration on the recovery completeness; and degree of separation of antimony, lead, and silver from the SPA alloy is investigated. When constructing equilibrium VLE phase diagrams, activity coefficients of binary alloys are calculated using the molecular volume interaction model (MVIM). Information is found on the influence of temperature and vacuum depth on the degree of sublimation and separation of metals from Sb–P and Pb–Ag formulations of various compositions. Saturated poar pressures are calculated for Sb ( p * = 273.664–67436.9 Pa), Pb (0.149–485.9), and Ag (5.054 × 10 –5 –6.558) at T = 1073–1773 K. It is shown that high ratios \((p_{{{\text{Sb}}}}^{*}/p_{{{\text{Pb}}}}^{*}\) = 1832.98–138.79, \(p_{{{\text{Pb}}}}^{*}/p_{{{\text{Ag}}}}^{*}\) = 2948.16–74.09) and separation coefficients (log β Sb = 2.099–3.33 and log β Pb = 1.813–3.944) give the theoretical prerequisites for the selective isolation of these metals by vacuum distillations when antimony and lead are sequentially enriched in the gas phase (β Sb > 1, β Pb > 1), and for, silver, in the liquid phase. It is established that the molar fraction of poorly sublimable lead/silver in the gas phase y Pb / y Ag = (1.55–982) × 10 –3 /(36–772) × 10 –3 increases with an increase in temperature 894–1601/1399–2099 K, pressure 1.33–133 Pa, and metal content in alloy x Pb / x Ag = 0.9–0.9999/0.9–0.99. Activity coefficients for antimony γ Sb = 0.832–0.999, lead γ Pb = 0.474–1.0, and silver γ Ag = 0.331–0.999 for Sb/Pb and Pb/Ag alloys of the composition 0.1–0.9/0.9–0.1 in the temperature range under study are calculated using MIVM. The practical significance of revealed dependences of the amount and composition of sublimation products of polymetallic alloys on the mentioned process parameters is caused by the development of the principal processing technology of the SPA alloy by vacuum distillation.

Practice of separating precious metals from base metals in gold-antimony alloy by selective chlorination leaching under controlling potential

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Antimony and gold substance flows analysis of pyrometallurgical process for antimony-gold concentrates

Clean and efficient separation process for high-antimony crude tin

Study on continuous crystallization and purification of bismuth from Pb-Bi alloy

Clean antimony production from stibnite concentrate with goethite residue co-treatment for zinc, iron, sulfur conservation

Selective recovery of antimony from Sb-bearing copper concentrates by integration of alkaline sulphide leaching solutions and microwave-assisted heating: A new sustainable processing route

Separation process for the production of high-purity antimony and bismuth oxides from copper electrorefining circuit wastes: The relevance of the redox control

Enhanced Hydrometallurgical Pretreatment of Micro-disseminated Gold Ore

Separation of antimony from lead-antimony alloy by molten salt electrolysis

Recovery of antimony from acidic and alkaline leaching solution of low-grade antimony ore by electrowinning process

Separation and Extraction of Valuable Metals from Electroplating Sludge by Carbothermal Reduction and Low-Carbon Reduction Refining

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Processing the Sb–Pb–Ag Alloy by the Distillation Method

Leaching of Gold with Copper–Tartrate–Thiosulfate Solutions

Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method

Leaching of Gold and Silver from a Complex Sulfide Concentrate in Copper-Tartrate-Thiosulfate Solutions

Study on the Leaching and Separation of Base and Precious Metals in Wasted PCB by Chlorine Dioxide

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity